A CORBA interface specification for Broadband Passive Optical Networks based on UML interface requirements
基于UML接口需求的宽带无源光网络CORBA接口规范

2003-07-07

A CORBA interface specification for Broadband Passive Optical Networks based on UML interface requirements
基于UML接口需求的宽带无源光网络CORBA接口规范

2003-07-07

自动交换光网络（ASON）技术要求 第4部分：信令技术
Technical requirements for automatically switched optical network - Part 4：Technical specification of signalling

2010-12-01

CONNECTORS WITH REMOVABLE FIBER OPTIC TERMINI, PERFORMANCE REQUIREMENTS AND QUALITY ASSURANCE PROVISIONS, GENERAL SPECIFICATION FOR
带可拆卸光纤终端的连接器.性能要求和质量保证规定.通用规范

2000-08-08

智能光分配网络 智能门禁技术要求 第2部分：接口要求
Intelligent optical distribution network—Technical requirements for intelligent door access control—Part 2:Interface specification

2020-08-31

塑料光纤电力信息传输系统技术规范 第1部分：技术要求
Technical specification for electric power information transmission system on plastic optical fiber—Part 1: Technical requirements

2015-09-11

GENERIC SPECIFICATION. CONNECTOR SETS FOR OPTICAL FIBRES AND CABLES. PART 1: REQUIREMENTS, TEST METHODS AND QUALIFICATION APPROVAL PROCEDURES.
通用规范 光纤和光缆的连接器组件 第1部分:要求、试验方法和资格认证程序

1998-06-30

Access, Terminals, Transmission and Multiplexing (ATTM); Plastic Optical Fibres; Part 1: Plastic Optical Fibre System Specifications for 100 Mbit/s and 1 Gbit/s; Sub-part 1: Application requirements for physical layer specifications for high-speed operations over Plastic Optical Fibres
接入、终端、传输和多路复用（ATTM）；塑料光纤；第1部分:100Mbit/s和1Gbit/s塑料光纤系统规范；子部分1:塑料光纤上高速操作的物理层规范的应用要求

2015-10-01

Connectors for electronic equipment. Product requirements-Detail specification for circular hybrid connectors M12 with electrical and fibre-optic contacts with screw locking
电子设备用连接器 产品要求

2010-07-31

Connectors for electronic equipment - Product requirements - Part 2-107: Detail specification for circular hybrid connectors M12 with electrical and fibre-optic contacts with screw locking
电子设备连接器 - 产品要求 - 第2-107部分:圆形混合连接器的详细规格M12带螺丝​​锁定的电气和光纤触点

2010-04-29

Connectors for electrical and electronic equipment. Product requirements-Rectangular connectors. Detail specification for hybrid connectors for industrial environments, for power supply and fibre optic data transmission, with push-pull locking
电气和电子设备用连接器 产品要求

2019-11-18

BS EN 61076-2-107. Connectors for electronic equipment. Product requirements. Part 2–107. Detail specification for circular hybrid connectors M12 with electrical and fibre-optic contacts with screw locking
英国标准EN 61076-2-107 电子设备用连接器 产品要求 第2部分–107 带螺纹锁紧的电气和光纤触点的圆形混合连接器M12详细规范

2008-09-10

Connectors for electrical and electronic equipment - Product requirements - Part 3-123: Rectangular connectors - Detail specification for hybrid connectors for industrial environments, for power supply and fibre optic data transmission, with push-pull locking
电气和电子设备用连接器.产品要求.第3-123部分:矩形连接器.带推拉锁定的工业环境用电源和光纤数据传输用混合连接器的详细规范

2019-09-13

Draft Document - Connectors for electronic equipment - Product requirements - Part 2-107: Detail specification for circular hybrid connectors M12 with electrical and fibre-optic contacts with screw locking (IEC 48B/1936/CD:2008)
文件草稿.文件草稿.电子设备连接器.产品要求.第2-107部分:带螺纹锁紧的电气和光纤触点的圆形混合连接器M12的详细规范（IEC 48B/1936/CD:2008）

2009-03-01

ISO/IEC/IEEE International Standard - Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 3: Standard for Ethernet AMENDMENT 6: Physical layer specifications and management parameters for ethernet passive optical networks protocol over coax
ISO/IEC/IEEE国际标准-信息技术-系统间电信和信息交换-局域网和城域网-特殊要求-第3部分:以太网标准修改件6:以太网的物理层规范和管理参数

2018-12-11

ISO/IEC/IEEE International Standard - Information technology -- Telecommunications and information exchange between systems -- Local and metropolitan area networks -- Specific requirements -- Part 3: Standard for Ethernet AMENDMENT 9: Physical layer specifications and management parameters for 1000 Mb/s operation over plastic optical fiber
ISO/IEC/IEEE国际标准信息技术系统间电信和信息交换局域网和城域网具体要求第3部分:以太网标准修改件9:1000以太网的物理层规范和管理参数

2018-12-11

Amendment 9 - Telecommunications and exchange between information technology systems - Requirements for local and metropolitan area networks - Part 3: Standard for Ethernet - Physical layer specifications and management parameters for 25 Gb/s and 50 Gb/s passive optical networks
修改件9.信息技术系统之间的电信和交换.局域网和城域网的要求.第3部分:以太网标准.25Gb/s和50Gb/s无源光网络的物理层规范和管理参数

2021-12-15

Telecommunications and exchange between information technology systems — Requirements for local and metropolitan area networks — Part 3: Standard for Ethernet — Amendment 9: Physical layer specifications and management parameters for 25 Gb/s and 50 Gb/s passive optical networks
信息技术系统之间的电信和交换局域网和城域网的要求第3部分:以太网标准修改件9:25Gb/s和50Gb/s无源光网络的物理层规范和管理参数

2021-12-15

Connectors for electronic equipment - Product requirements - Part 2-107: Detail specification for circular hybrid connectors M12 with electrical and fibre-optic contacts with screw locking (IEC 61076-2-107:2010); German version EN 61076-2-107:2010
电子设备用连接器.产品要求.第2-107部分:带螺纹锁紧的电气和光纤触点的圆形混合连接器M12的详细规范（IEC 61076-2-107-2010）；德文版EN 61076-2-107:2010

2011-02-01

Connectors for electrical and electronic equipment - Product requirements - Part 3-123: Rectangular connectors - Detail specification for hybrid connectors for industrial environments, for power supply and fibre optic data transmission, with push-pull locking (IEC 61076-3-123:2019); German version E
电气和电子设备用连接器.产品要求.第3-123部分:矩形连接器.电源和光纤数据传输用推拉锁定工业环境混合连接器详细规范（IEC 61076-3-123-2019）；德语版E

2021-02-01