BS ISO 15442:2012+A1:2015规定了液压驱动装载机起重机及其底盘或静态基础安装件的设计、计算、检查和测试的最低要求。本标准适用于出版一年后制造的所有新型装载机起重机。本国际标准无意要求对现有装载机起重机进行改装。本规范不适用于船上或浮式结构物上使用的装载机起重机，也不适用于设计为特殊设备（如货代）整体组成部分的铰接式臂架系统起重机。它处理与装载机起重机有关的所有重大危险、危险情况或危险事件，但与载人有关的危险除外，当按预期使用时，以及在制造商合理预见的误用情况下。重要危险清单见附录A。注:使用起重机起吊人员可能需要遵守特定的国家法规。 参考参考:ISO 3744ISO 3744ISO 3744ISO 3744ISO 3744ISO 3744ISO 3744ISO 3744ISO 3744ISO 3744ISO 3744ISO 3744ISO 371313ISO 411313ISO 4113131313ISO 1313131313ISO 13131313ISO 1313ISO 13414141414141414141414141414141414141414141414141414141414141414141414141414141414141414141414141414141414141414141414141414141414141414141414141414141414141414141414141414141414141414141414141414141414141414141414141414141414141414141414141414141414141414141414141414141414141414141414141414141414141414141414141414141414141414141414141414141411111201ISO 12478-1ISO 15513CEN/TS 13001-3-2CEN/TS 13001-3-5所有现行修正案购买本文件时提供的信息包括在内。

BS ISO 15442:2012+A1:2015 specifies the minimum requirements for the design, calculation, examination and testing of hydraulic powered loader cranes and their mountings onto chassis or static foundations.It is applicable to all new loader cranes manufactured one year after its publication. It is not the intent of this International Standard to require the retrofitting of existing loader cranes.It is not applicable to loader cranes used on board ships or floating structures or to articulated boom system cranes designed as a total integral part of special equipment such as forwarders.It deals with all significant hazards, hazardous situations or hazardous events relevant to loader cranes, with the exception of hazards related to the lifting of persons, when used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer. See Annex A for a list of the significant hazards.NOTE The use of cranes for the lifting of persons may be subject to specific national regulations.Cross References:ISO 3744ISO 3864-1ISO 4302ISO 4306-1ISO 4310ISO 4413ISO 5353ISO 7752-1ISO 8566-1ISO 8566-2ISO 11201ISO 10245-1ISO 11660-1ISO 11660-2ISO 12100:2010ISO 13849-1ISO 13854ISO 13857ISO 20332IEC 60068-2-64IEC 60204-32:2008IEC 61000-6-2IEC 61000-6-4ISO 7000ISO 7296-2ISO 8686-2ISO 9927-1ISO 9928-1ISO 9942-1ISO 12478-1ISO 15513CEN/TS 13001-3-2CEN/TS 13001-3-5All current amendments available at time of purchase are included with the purchase of this document.