ISO 13766-1:2018为评估ISO 6165:2012中定义的土方机械和ISO/TR 12603:2010中定义的以下建筑施工机械的电磁兼容性（EMC）提供了测试方法和验收标准: 钻探及基础设备； -用于制备、运输和压实混凝土、砂浆和钢筋加工的设备； -道路施工和维护机械设备。 ISO 13766-1:2018涉及典型电磁环境条件下的一般EMC要求。（ISO 13766？2:2018专门涉及与功能安全相关的EMC要求）。 还涉及拟安装在机械上的电气/电子组件（ESA）和单独的ESA。评估以下电磁干扰现象: -宽带和窄带电磁干扰； -电磁场抗扰度； -静电放电； -传导瞬变。 机器可以使用直流或交流或两者的组合作为内部电源系统。 ISO 13766-1:2018不适用于由外部电网供电的机器或军事应用引起的现象。 注1:IEC 61000涵盖了并网电机。 注2:联合国欧洲经委会R10修订版涵盖了混合动力机器。5.

ISO 13766-1:2018 provides test methods and acceptance criteria for the evaluation of the electromagnetic compatibility (EMC) of earth-moving machinery, as defined in ISO 6165:2012, and of the following building construction machinery as defined in ISO/TR 12603:2010: - drilling and foundation equipment; - equipment used for the preparation, conveyance and compaction of concrete, mortar and processing reinforcement; - road construction and maintenance machinery and equipment. ISO 13766-1:2018 deals with general EMC requirements under typical electromagnetic environmental conditions. (ISO 13766？2:2018 deals with EMC requirements specifically related to functional safety). Electrical/electronic subassemblies (ESA) and separate ESA intended to be fitted to the machinery are also dealt with. The following electromagnetic disturbance phenomena are evaluated: - broadband and narrowband electromagnetic interference; - electromagnetic field immunity; - electrostatic discharge; - conducted transients. The machinery can have DC or AC or a combination of both as the internal electrical power supply system. ISO 13766-1:2018 is not applicable to machines that are designed to be supplied by an external mains network or to phenomena caused by military applications. NOTE 1 Grid-connected machines are covered by IEC 61000. NOTE 2 Hybrid machines are covered in UN ECE R10-Rev. 5.