ASQ Z1.4-2003(R2018)-按属性检验的抽样程序和表格-国家数字标准馆

现行 ASQ Z1.4-2003(R2018)

到馆提醒

收藏跟踪

购买正版

Sampling Procedures and Tables for Inspection by Attributes 按属性检验的抽样程序和表格

ASQ Z1。4-2003（R2018）制定了按属性检查的抽样计划和程序。当责任机构规定时，本出版物应在规范、合同、检验说明或其他文件中引用，并以本文规定的条款为准。“责任机构”应在买方和卖方或生产商和用户同意的上述文件之一中指定。

ASQ Z1.4-2003 (R2018) establishes sampling plans and procedures for inspection by attributes. When specified by the responsible authority, this publication shall be referenced in the specification, contract, inspection instructions, or other documents and the provisions set forth herein shall govern. The "responsible authority" shall be designated in one of the above documents, as agreed to by the purchaser and seller or producer and user.

分类信息

发布单位或类别：美国-美国质量控制协会

关联关系

研制信息

相似标准/计划/法规

GB/T 13546-1992

挑选型计数抽样检查程序及抽样表
Rectifying sampling procedures and tables for inspections by attributes

海洋仪器计数抽样检查程序和表
Sampling procedures and tables for oceanographic instruments inspection by attributes

Sampling Procedures and Tables for Inspection of Isolated Lots by Attributes
按属性检查隔离批次的抽样程序和表格

ASQ Z1.4-2003(R2018) and Z1.9-2003(R2018) SET

Sampling Procedures and Tables for Inspection by Attributes (Z1.4) and Sampling Procedures and Tables for Inspection by Variables for Percent Nonconforming (Z1.9) SET
属性检验抽样程序和表格（Z1.4）和不合格百分比变量检验抽样程序和表格（Z1.9）集

SET of ASQ Z1.4 (Sampling Procedures and Tables for Inspection by Attributes) and ASQ Z1.9 (Sampling Procedures and Tables for Inspection by Variables for Percent Nonconforming)
一套ASQ Z1 4（按属性检验的抽样程序和表格）和ASQ Z1 9（不合格百分比的变量检验抽样程序和表格）

计数检查单水平和多水平连续抽样检查程序及表
Single-and multi-level continuous sampling procedures and tables for inspection by attributes

单水平和多水平计数连续抽样检验程序及表
Single and multi-level continuous sampling procedures and tables for inspection by attributes

TechAmerica EIA-585(R1997)

Zero Acceptance Number Sampling Procedures and Tables for Inspection by Attributes of Isolated Lots
零验收编号抽样程序和表格用于按隔离批次属性进行检验

GB/T 13264-2008

不合格品百分数的小批计数抽样检验程序及抽样表
Sampling procedures and tables for small lot inspection by attributes for percent nonconforming items

MIL MIL-STD-105E Notice 3-Cancellation

Sampling Procedures and Tables for Inspection by Attributes (See Notice 3 for Replacement Information)
按属性检验的抽样程序和表格（更换信息见通知3）

KS A IEC 60410(2022 Confirm)

계수값 검사를 위한 샘플링 계획과 절차
抽样计划和属性检验程序

KS A IEC 60410(2017 Confirm)

계수값 검사를 위한 샘플링 계획과 절차
抽样计划和检验程序

TechAmerica EIA-584(R2002)

Zero Acceptance Number Sampling Procedures and Tables for Inspection by Attributes of a Continuous Manufacturing Process
按连续制造过程属性检验的零验收编号抽样程序和表格

BS ISO 28590-2017

Sampling procedures for inspection by attributes. Introduction to the ISO 2859 series of standards for sampling for inspection by attributes
按属性检验的抽样程序 ISO 2859计数抽样检验系列标准简介

계수형 샘플링검사 절차 —계수형 샘플링검사용 KS Q ISO 2859 시리즈 표준의 개요
按属性检验抽样程序 - 介绍ISO 2859系列抽样检验属性标准

KS Q ISO 28590(2024 Confirm)

계수형 샘플링검사 절차 —계수형 샘플링검사용 KS Q ISO 2859 시리즈 표준의 개요
属性检验取样程序ISO 2859系列属性检验取样标准介绍

Sampling procedures for inspection by attributes — Introduction to the ISO 2859 series of standards for sampling for inspection by attributes
按属性检验抽样程序 - 介绍ISO 2859系列抽样检验属性标准

Sampling procedures for inspection by attributes-Specification for skip-lot sampling procedures
计数检验抽样程序

GB/T 13262-2008

不合格品百分数的计数标准型一次抽样检验程序及抽样表
Single sampling procedures and tables for inspection having desired operating characteristics by attributes for percent nonconforming

周期检验计数抽样程序及表（适用于对过程稳定性的检验）
Sampling proceduresand tables for periodic inspection by attributes (Apply to inspection of process stability)

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统