KS M ISO 4901-2013(2018)-不饱和聚酯树脂增强塑料残留苯乙烯单体含量的测定 -国家数字标准馆

现行 KS M ISO 4901-2013(2018)

到馆提醒

收藏跟踪

购买正版

불포화 폴리에스테르 수지계 — 강화 플라스틱 — 잔류 스티렌 단량체 함량 측정 不饱和聚酯树脂增强塑料残留苯乙烯单体含量的测定

发布日期： 2013-12-31

该标准利用气体色谱法，将其命名为聚合状态的不饱和聚酯树脂（以下简称聚合状态下的UP树脂）。规定钢化塑料残留苯乙烯单体的测定方法。残留苯乙烯单体是评价聚合状态下UP树脂加胶程度的重要尺度。该方法不适合具有高耐化学性的UP树脂。

이 표준은 기체 크로마토그래피를 이용해서 중합 상태의 불포화 폴리에스테르 수지(이하 중합 상태 에서의 UP 수지로 명기한다.) 강화 플라스틱의 잔류 스타이렌 단량체의 측정 방법을 규정한다. 잔류 스타이렌 단량체는 중합 상태에서 UP 수지의 가교 정도를 평가하는 데 중요한 척도가 된다. 이 방법 은 높은 내화학성을 가지는 UP 수지에는 적합하지 않다.

分类信息

发布单位或类别：韩国-韩国标准

ICS分类： 83.120橡胶和塑料工业 - 增强塑料

关联关系

研制信息

相似标准/计划/法规

섬유 강화 플라스틱용 액상 불포화 폴리에스테르 수지
液态不饱和聚酯树脂纤维增强塑料

JIS K 6919-1992

Liquid unsaturated polyester resins for fiber reinforced plastics
纤维增强塑料用液体不饱和聚酯树脂

纤维增强塑料用液体不饱和聚酯树脂
Liquid unsaturated polyester resin for fiber reinforced plastics

KS M ISO 4901(2023 Confirm)

불포화 폴리에스테르 수지계 — 강화 플라스틱 — 잔류 스티렌 단량체 함량 측정
不饱和聚酯树脂增强塑料苯乙烯单体残留量的测定

GB/T 15928-2008

不饱和聚酯树脂基增强塑料中残留苯乙烯单体含量的测定
Reinforced plastics based on unsaturated polyester resins - Determination of residual styrene monomer content

纤维增强塑料机械成型用不饱和聚酯树脂
Unsaturated polyester resin for mechanically transformed fiber reinforced plastics

GB/T 14520-1993

气相色谱分析法测定不饱和聚酯树脂增强塑料中的残留苯乙烯单体含量
Determination of residual styrene monomer content in reinforced plastics based on unsaturated polyester resins by gas chromatography

BS 2782-4-METHOD 432A-1991

Methods of testing plastics. Chemical properties-Determination of residual styrene monomer content in reinforced plastics based on unsaturated polyester resins
塑料的试验方法化学性质不饱和聚酯树脂增强塑料中残留苯乙烯单体含量的测定

玻璃钢渔船用不饱和聚酯树脂和玻璃纤维制品
Unsaturated polyester resin and fiberglass products for glass fiber reinforced plastics fishing vessels

UNE-EN 1796-2006+A1-2009

Plastics piping systems for water supply with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP)
有或无压力供水用塑料管道系统.基于不饱和聚酯树脂（UP）的玻璃纤维增强热固性塑料（GRP）

배수 및 하수용 플라스틱 배관 시스템 —불포화 폴리에스테르 수지 유리섬유 강화 플라스틱(GRP) — 압력 및 비압력 배관
用于压力和非压力排水和污水的塑料管道系统 - 基于不饱和聚酯（UP）树脂的玻璃增强热固性塑料（GRP）系统

수도용 플라스틱 배관 시스템 —불포화 폴리에스테르 수지 유리섬유 강화 플라스틱(GRP) — 압력 및 비압력 배관
基于不饱和聚酯（UP）树脂压力和无压力管道系统的供水用玻璃钢（GRP）塑料管道系统

BS PD CEN/TS 14578-2013

Plastics piping systems for water supply or drainage and sewerage. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Recommended practice for installation
供水、排水和排污用塑料管道系统基于不饱和聚酯树脂（UP）的玻璃纤维增强热固性塑料（GRP）安装推荐规程

UNE-CEN/TS 14578-2005 EX

Plastics piping systems for water supply or drainage and sewerage. Glass-reinforced thermosetting plastics (GPR) based on unsaturated polyester resin (UP). Recommended practice for installation.
供水、排水和排污用塑料管道系统基于不饱和聚酯树脂（UP）的玻璃纤维增强热固性塑料（GPR）安装的推荐做法

UNE-CEN/TS 14807-2006 EX

Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the structural analysis of buried GRP-UP pipelines
塑料管道系统.基于不饱和聚酯树脂（UP）的玻璃增强热固性塑料（GRP）.埋地GRP-UP管道的结构分析指南

Plastics piping systems for pressure and non-pressure water supply, drainage or sewerage — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
压力和非压力供水、排水或排水用塑料管道系统.基于不饱和聚酯（UP）树脂的玻璃增强热固性塑料（GRP）系统

BS EN ISO 23856-2021

Plastics piping systems for pressure and non-pressure water supply, drainage or sewerage. Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
压力和非压力供水、排水或排污用塑料管道系统基于不饱和聚酯（UP）树脂的玻璃纤维增强热固性塑料（GRP）系统

UNE-EN 14364-2007+A1-2009

Plastics piping systems for drainage and sewerage with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Specifications for pipes, fittings and joints
带或不带压力的排水和污水用塑料管道系统.基于不饱和聚酯树脂（UP）的玻璃纤维增强热固性塑料（GRP）.管道、配件和接头规范

Reinforced plastics based on unsaturated-polyester resins — Determination of the residual styrene monomer content, as well as the content of other volatile aromatic hydrocarbons, by gas chromatography
基于不饱和聚酯树脂的增强塑料——用气相色谱法测定残留苯乙烯单体含量以及其他挥发性芳烃含量

BS ISO 4901-2011

Reinforced plastics based on unsaturated-polyester resins. Determination of the residual styrene monomer content, as well as the content of other volatile aromatic hydrocarbons, by gas chromatography
基于不饱和聚酯树脂的增强塑料用气相色谱法测定残留苯乙烯单体含量以及其他挥发性芳烃含量

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统