BS PD IEC/TR 63040:2016描述了间隙和爬电尺寸研究的试验结果 距离，对于印刷线路材料和其他材料，间距等于或小于2 mm 绝缘的等效布置，间隙和爬电距离如下 沿着固体绝缘材料表面的相同路径。本文件中包含的信息仅为研究结果，不能使用 用于确定低压范围内设备的间隙和爬电距离 系统，其中IEC 60664-1适用。然而，距离也可以考虑在内 功能原因。本文件提供了与以下标准相关的研究结果:独立于微环境的间隙；1级、2级和3级污染的爬电距离，扩展了较小 与具有类似于印刷电路板设计特征的产品的距离； 防止绝缘表面闪络的爬电距离；关于保持最小绝缘电阻的最小爬电距离的信息。一种用于评估任何材料表面相关水吸附基团的试验方法 描述了尚未分类的绝缘材料。交叉引用:IEC 60664-1:2007IEC 60050-212:2010IEC 60112IEC 60364-5-51IEC 60529IEC 60664-5:2007IEC 60721-3-3IEC 60721-3-7IEC 60721-3-9购买本文件时提供的所有现行修订均包括在内。

BS PD IEC/TR 63040:2016 describes test results of research on dimensioning of clearances and creepage distances, for spacing equal to or less than 2 mm for printed wiring material and other equivalent arrangements of insulation, where the clearance and the creepage distance follows the same path along the surface of solid insulation.The information contained in this document is the result of research only and cannot be used for dimensioning the clearances and creepage distances for equipment within low-voltage systems, where IEC 60664-1 applies. However distances can be taken into account for functional reasons.This document provides results of research related to the following criteria:clearances independent from the micro-environment;creepage distances for pollution degree 1, 2 and 3 which extends the use of smaller distances to products having design features similar to printed circuit boards;creepage distances to avoid flashover of the insulating surface;information on minimum creepage distances to maintain minimum insulation resistance.A test method for the evaluation of the relevant water adsorption group for the surface of any insulating material which has not yet been classified is described.Cross References:IEC 60664-1:2007IEC 60050-212:2010IEC 60112IEC 60364-5-51IEC 60529IEC 60664-5:2007IEC 60721-3-3IEC 60721-3-7IEC 60721-3-9All current amendments available at time of purchase are included with the purchase of this document.