首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 ASTM C1818-22
到馆提醒
收藏跟踪
购买正版
Standard Specification for Synthetic Fiber Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe 合成纤维增强混凝土涵洞、雨水管和污水管的标准规范
发布日期: 2022-06-01
1.1 本规范涵盖了合成纤维增强混凝土管(Syn FRCP),用于输送污水、工业废物和雨水,以及建造涵洞。 注1: 经验表明,该产品的成功性能取决于正确选择管道强度、垫层和回填类型、注意安装是否符合施工规范以及是否在施工现场进行充分检查。本规范不包括垫层、回填、现场荷载条件与管道强度指标之间的关系或异常环境条件下的耐久性要求。这些要求应包含在项目规范中。 注2: 本产品为刚性管道,不依赖于土壤额外支撑的挠度(管道刚度)。 注3: 本标准要求对Syn进行长期测试- FRCP符合第节 9 为了评估纤维混凝土基体的长期材料强度,这超出了钢筋混凝土管的典型要求。 1.2 单位- 以英寸-磅为单位的数值应视为标准值。括号中给出的值是到国际单位制的数学转换,仅供参考,不被视为标准值。 1.3 本国际标准是根据世界贸易组织技术性贸易壁垒(TBT)委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。
1.1 This specification covers synthetic fiber reinforced concrete pipe (Syn-FRCP), intended to be used for the conveyance of sewage, industrial wastes, and storm water and for the construction of culverts. Note 1: Experience has shown that the successful performance of this product depends upon the proper selection of the pipe strength, the type of bedding and backfill, the care that the installation conforms to the construction specifications, and provision for adequate inspection at the construction site. This specification does not include requirements for bedding, backfill, the relationship between field load conditions and the strength designation of pipe, or durability under unusual environmental conditions. These requirements should be included in the project specification. Note 2: This product is a rigid pipe and it does not depend upon deflection (pipe stiffness) for additional support from the soil. Note 3: This standard requires long-term testing of Syn-FRCP in accordance with Section 9 that goes above and beyond what is typically required for steel reinforced concrete pipe, in order to evaluate the long-term material strength of the fiber-concrete matrix. 1.2 Units— The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
分类信息
关联关系
研制信息
归口单位: C13.02
相似标准/计划/法规
现行
ASTM C1765-24
Standard Specification for Steel Fiber Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe
钢纤维混凝土涵洞、雨水排水管和污水管标准规范
2024-04-01
现行
ASTM C1116/C1116M-23
Standard Specification for Fiber-Reinforced Concrete
纤维增强混凝土标准规范
2023-08-01
现行
ASTM A820/A820M-22
Standard Specification for Steel Fibers for Fiber-Reinforced Concrete
纤维增强混凝土用钢纤维
2022-09-01
现行
ASTM D7357-07(2019)
Standard Specification for Cellulose Fibers for Fiber-Reinforced Concrete
纤维增强混凝土纤维素纤维标准规范
2019-12-01
现行
ASTM C76-22a
Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe
钢筋混凝土涵洞、雨水道和污水管标准规范
2022-09-01
现行
ASTM C76M-22a
Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe (Metric)
钢筋混凝土涵洞、雨水道和污水管(米制)
2022-09-01
现行
ASTM C507-22
Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe
钢筋混凝土椭圆涵洞、雨水道和污水管标准规范
2022-09-01
现行
ASTM C506-22a
Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe
钢筋混凝土拱形涵洞、雨水道和污水管标准规范
2022-09-15
现行
ASTM C507M-22
Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe (Metric)
钢筋混凝土椭圆涵洞、雨水道和污水管(米制)
2022-09-01
现行
ASTM C506M-22a
Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe (Metric)
钢筋混凝土拱形涵洞、雨水道和污水管(米制)
2022-09-15
现行
ASTM C655-19a
Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe
钢筋混凝土D型装载机 风暴排水管和下水道管道标准规范
2019-07-15
现行
ASTM D8505/D8505M-23
Standard Specification for Basalt and Glass Fiber Reinforced Polymer (FRP) Bars for Concrete Reinforcement
混凝土钢筋用玄武岩和玻璃纤维增强聚合物(FRP)钢筋的标准规范
2023-04-01
现行
ASTM D7957/D7957M-22
Standard Specification for Solid Round Glass Fiber Reinforced Polymer Bars for Concrete Reinforcement
混凝土加固用实心圆形玻璃纤维增强聚合物钢筋的标准规范
2022-02-01
现行
ASTM C1433-24
Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers
涵洞、雨水管和下水道用预制钢筋混凝土整体箱形截面标准规范
2024-09-15
现行
ASTM C655M-19a
Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe (Metric)
钢筋混凝土承载盖 风暴排水管和下水管(公制)标准规范
2019-07-15
现行
ASTM C1417-19
Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design
用于直接设计的钢筋混凝土下水道 风暴排水管和管道管道制造标准规范
2019-07-15
现行
ASTM C1846/C1846M-19(2024)
Standard Specification for Performance Based Manufacture of Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe
基于性能的钢筋混凝土涵洞、雨水排水管和污水管制造标准规范
2024-04-01
现行
ASTM C1504-20
Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains
混凝土和风暴排水预制钢筋混凝土三面结构制造标准规范
2020-09-15
现行
ASTM C1666/C1666M-08(2023)
Standard Specification for Alkali Resistant (AR) Glass Fiber for GFRC and Fiber-Reinforced Concrete and Cement
GFRC和纤维增强混凝土及水泥用耐碱(AR)玻璃纤维标准规范
2023-05-01
现行
ASTM C1941-24
Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers for Jacking
顶置涵洞、雨水沟和下水道用预制钢筋混凝土整体箱形截面的标准规范
2024-01-01