模内装饰（IMD）用薄膜 油墨粘接性能测定方法
Films used in IMD - Test method of ink adhesion properties

2012-12-31

prEN 716-3. Furniture. Children's cots and folding cots for domestic use. Part 3. Additional safety requirements and test methods for folding cots
prEN 716-3 家具家用儿童床和折叠床 第三部分 折叠胶辊的附加安全要求和试验方法

2000-11-01

Standard Test Method for Measuring Friction and Adhesive Wear Properties of Lubricated and Nonlubricated Materials Using the Twist Compression Test (TCT)
用扭转压缩试验（TCT）测量润滑和非润滑材料的摩擦和粘着磨损性能的标准试验方法

2023-06-01

Standard Test Method for Apparent Viscosity of Adhesives Having Shear-Rate-Dependent Flow Properties Using Rotational Viscometry
使用旋转粘度计具有剪切速率依赖性流动性的粘合剂的表观粘度的标准测试方法

2018-11-01

Standard Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints
用于外部绝缘和表面处理系统（EIFS）接头的密封剂拉伸粘合性能测定的标准试验方法

2023-01-01

Ceramic tiles. Grouts and adhesives-Requirements, test methods, evaluation of conformity, classification and designation of liquid-applied waterproofing membranes for use beneath ceramic tiling bonded with adhesives
瓷砖 灌浆和粘合剂

2015-08-31

Ceramic tiles - Grouts and adhesives, Part 5: Requirements, test methods, evaluation of conformity, classification and designation of liquid-applied waterproofing membranes for use beneath ceramic tiling bonded with adhesives
瓷砖.灌浆和粘合剂 第5部分:用粘合剂粘合的瓷砖下面用液体防水膜的要求、试验方法、合格评定、分类和命名

2020-03-06

Ceramic tiles — Grouts and adhesives — Part 5: Requirements, test methods, evaluation of conformity, classification and designation of liquid-applied waterproofing membranes for use beneath ceramic tiling bonded with adhesives
陶瓷砖 - 胶浆和粘合剂 - 第5部分:粘合粘合剂的陶瓷贴面使用的液体应用防水膜的一致性 分类和指定的要求 测试方法

2015-08-14

Ceramic tiles. Grouts and adhesives-Requirements, test methods, evaluation of conformity, classification and designation for waterproof membranes used with the installation of ceramic tiles
瓷砖 灌浆和粘合剂

2020-11-05

Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives - Requirements, test methods, evaluation of conformity, classification and designation
用粘合剂粘合的瓷砖下面使用的液体应用防水产品.要求 试验方法 合格评定 分类和命名

2008-05-14

Ceramic tiles — Grouts and adhesives — Part 6: Requirements, test methods, evaluation of conformity, classification and designation for waterproof membranes used with the installation of ceramic tiles
瓷砖.灌浆和粘合剂.第6部分:瓷砖安装用防水膜的要求、试验方法、合格评定、分类和名称

2020-11-04

Space systems. Determination of test methods to characterize material or component properties required for break-up models used for Earth re-entry
太空系统 确定用于地球再入的破裂模型所需材料或部件特性的试验方法

2021-10-07

Space systems — Determination of test methods to characterize material or component properties required for break-up models used for Earth re-entry
航天系统.用于地球再入的破裂模型所需材料或部件特性的试验方法测定

2021-09-15

Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives. Requirements, test methods, assessment and verification of constancy of performance, classification and marking
液体应用防水产品 用于瓷砖下面 用粘合剂粘合 性能、分类和标记稳定性的要求、试验方法、评估和验证

2017-02-28

Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives - Requirements, test methods, assessment and verification of constancy of performance, classification and marking
用粘合剂粘合的瓷砖下面使用的液体应用防水产品.性能、分类和标记稳定性的要求、试验方法、评估和验证

2017-05-01

最终灭菌医疗器械包装材料　第10部分：可密封组合袋、卷材和盖材生产用涂胶聚烯烃非织造布材料　要求和试验方法
Packaging materials for terminally sterilized medical devices—Part 10:Adhesive coated nonwoven materials of polyolefines for use in the manufacture of sealable pouches,reels and lids—Requirements and test methods

2009-06-16

最终灭菌医疗器械包装材料　第7部分：环氧乙烷或辐射灭菌　无菌屏障系统生产用可密封涂胶纸要求和试验方法
Packaging materials for terminal sterilized medical devices—Part 7:Adhesive coated paper for the manufacture of sealable packs for medical use for sterilization by ethylene oxide or irradiation—Requirements and test methods

2009-06-16

BS EN 14079-1. Non-active medical devices. Properties for compresses and wound packing products for medical use. Part 1. Test methods and requirements for absorbent cotton gauze and absorbent cotton and viscose gauzes used in the manufacturing of compresses and wound packing products
英国标准EN 14079-1 非活动医疗设备 医用压缩材料和伤口包装产品的性能 第一部分 用于压缩和伤口包装产品制造的脱脂棉纱布、脱脂棉和粘胶纱布的试验方法和要求

2006-09-21