现行
IEC 60309-2:2021
到馆阅读
收藏跟踪
分享链接
购买正版
选择购买版本
本服务由中国标准服务网提供
电子版
英语+法语/电子版加密PDF格式/约1分钟可下载/有水印/要装插件FileOpen/电脑需联网/限制累计3台电脑共打印5次
¥ 3,076
更多
前往中国标准服务网获取更多购买信息
支持批量购买纸质版标准
Plugs, fixed or portable socket-outlets and appliance inelts for industrial purposes - Part 2: Dimensional compatibility requirements for pin and contact-tube accessories
工业用固定或便携式插座和器具插座第2部分:插针和接触管附件的尺寸互换性要求
IEC 60309-2:20 21适用于插头、固定或便携式插座和电器入口,以下简称附件,额定工作电压不超过1 000 V DC或1 000 V AC,频率不超过500 Hz,额定电流不超过125 A,主要用于室内或室外工业用途。
本第五版取消并取代了1999年出版的第四版、修正案1:20 05和修正案2:20 12。本版构成技术修订版。
与上一版相比,此版本包括以下重大技术变更:
增加了非实心引脚的要求和测试;
附加等级IPX9
指示中性端子和/或接地端子的附加标记。
本文件应与IEC 60309-1:20 21一起阅读。
IEC 60309-2:2021 applies to plugs, fixed or portable socket-outlets, and appliance inlets, hereinafter referred to as accessories, with a rated operating voltage not exceeding 1 000 V DC or 1 000 V AC with a frequency not exceeding 500 Hz and a rated current not exceeding 125 A, primarily intended for industrial use, either indoors or outdoors.
This fifth edition cancels and replaces the fourth edition published in 1999, Amendment 1:2005 and Amendment 2:2012. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
- addition of requirements and test for non-solid pins;
- additional rating IPX9;
- additional marking to indicate neutral terminal and/or earthing terminal.
This document is to be read in conjunction with IEC 60309-1:2021.