现行

JIS H 7803-2005

General rules for the determination of particle size and crystallite size in metal catalysts
金属催化剂粒度和微晶尺寸测定通则

2005-01-01

现行

ASTM D4438-24

Standard Test Method for Particle Size Distribution of Catalysts and Catalyst Carriers by Electronic Counting
用电子计数法测定催化剂和催化剂载体粒度分布的标准试验方法

2024-03-15

现行

GOST 23402-1978

Порошки металлические. Микроскопический метод определения размеров частиц
金属粉末 微观尺寸测定法

现行

GB/T 6524-1986

金属粉末粒度分布的测定——光透法
Determination of particle size distribution of metallic powders by method of photosedimentation

1986-06-23

现行

GB/T 11107-2018

金属及其化合物粉末 比表面积和粒度测定 空气透过法
Metallic and its compound powder—Determination of specific surface and particle size—Air permeating method

2018-09-17

现行

GB/T 36165-2018

金属平均晶粒度的测定 电子背散射衍射（EBSD）法
Determination of average grain size of metal—Electron backscatter diffraction （EBSD）method

2018-05-14

现行

GB/T 20170.1-2006

稀土金属及其化合物物理性能测试方法 稀土化合物粒度分布的测定
Test methods for physical characters of rare earth metals and their compounds Determination for particle size distribution of rare earth compounds

2006-04-13

现行

BS EN ISO 11125-2-2018

Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives-Determination of particle size distribution
涂料和相关产品使用前钢衬底的制备 金属喷砂清理磨料的试验方法

2019-08-22

现行

BS EN ISO 11127-2-2021

Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasives-Determination of particle size distribution
涂料和相关产品使用前钢衬底的制备 非金属喷砂清理磨料的试验方法

2021-03-03

现行

KS M ISO 11125-2(2017 Confirm)

도료와 관련 제품의 도장 전 강판 기재의 표면 처리-금속 블라스트 세정용 연마제의 시험 방법-제2부:입자 크기 분포 측정
涂料和有关产品使用前钢基体的制备金属喷砂清理磨料的试验方法第2部分:粒度分布的测定

2002-12-31

现行

KS M ISO 11125-2

도료 및 관련 제품의 도장 전 철강 소지 표면처리 — 금속 블라스트 세정 연마재 시험방법 — 제2부: 입도분포 측정
涂料和相关产品使用前钢衬底的制备.金属喷砂清理磨料的试验方法.第2部分:粒度分布的测定

2021-04-26

现行

ISO 11125-2-2018

Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning abrasives — Part 2: Determination of particle size distribution
涂料和相关产品应用前的钢基材的制备 - 金属喷砂清洁磨料的测试方法 - 第2部分:粒度分布的测定

2018-08-23

现行

GB/T 19816.2-2005

涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第2部分:颗粒尺寸分布的测定
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 2:Determination of particle size distribution

2005-06-10

现行

KS M ISO 11127-2(2017 Confirm)

도료와 관련 제품의 도장 전 철강 소지의 조정－비금속 블라스트 세정 연마재 시험방법－제2부：입도 분포 측정
涂料和有关产品使用前钢基体的制备非金属喷砂清理磨料的试验方法第2部分:粒度分布的测定

2012-12-18

现行

KS M ISO 11127-2

도료와 관련 제품의 도장 전 철강 소지의 표면처리 — 비금속 블라스트 세정 연마재 시험방법 — 제2부: 입도 분포 측정
涂料和相关产品使用前钢衬底的制备.非金属喷砂清理磨料的试验方法.第2部分:粒度分布的测定

2021-04-26

现行

ISO 11127-2-2020

Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 2: Determination of particle size distribution
涂料和相关产品应用前的钢基材的制备 - 非金属喷砂清洁磨料的测试方法 - 第2部分:粒度分布的测定

2020-10-09

现行

GOST 30483-1997

Зерно. Методы определения общего и фракционного содержания сорной и зерновой примесей; содержания мелких зерен и крупности; содержания зерен пшеницы, поврежденных клопом-черепашкой; содержания металломагнитной примеси
粮食 测定外来物质和受损谷物的一般和分数含量的方法;小颗粒含量和粒度;受害虫侵袭的谷物含量;金属颗粒含量

1997-04-25

现行

UNE-EN ISO 11125-2-1997

PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS. TEST METHODS FOR METALLIC BLAST-CLEANING ABRASIVES. PART 2: DETERMINATION OF PARTICLE SIZE DISTRIBUTION. (ISO 11125-2:1993).
涂料和相关产品使用前钢衬底的制备 金属喷砂清理磨料的试验方法 第2部分:粒度分布的测定 （ISO 11125-2:1993）

1997-12-15

现行

UNE-EN ISO 11127-2-1998

PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS. TEST METHODS FOR NON-METALLIC BLAST-CLEANING ABRASIVES. PART 2: DETERMINATION OF PARTICLE SIZE DISTRIBUTION. (ISO 11127-2:1993).
涂料和相关产品使用前钢衬底的制备 非金属喷砂清理磨料的试验方法 第2部分:粒度分布的测定 （ISO 11127-2:1993）

1998-03-11