BS EN ISO 17634:2015规定了管状药芯焊条的分类要求 用于抗蠕变和耐腐蚀的气体保护金属极电弧焊的焊后热处理条件 低合金高温钢。一个管状药芯电极可通过以下方式进行测试和分类: 不同的保护气体。本国际标准是一个综合规范，规定了使用系统进行分类 基于所有焊接金属的化学成分，或使用基于拉伸强度的系统 所有材料的强度和化学成分- 焊接金属。带有后缀字母“A”的段落和表格仅适用于管状芯材 根据化学成分分类为系统的电极，要求 所有焊缝金属的屈服强度和47 J的平均冲击能符合本标准 国际标准。带有后缀字母“B”的段落和表格仅适用于管状芯材 根据allweld的抗拉强度和化学成分，将焊条分类为该系统 金属应符合本国际标准。 没有后缀字母“A”或后缀字母“B”的段落和表格适用 适用于根据本国际标准分类的所有管状药芯焊条。人们认识到，管状药芯电极的工作特性可以通过 脉冲电流的使用，但就本国际标准而言，脉冲电流不用于 确定电极分类。交叉引用:ISO 544ISO 3690ISO 6947ISO 14175ISO 14344ISO 15792-1:2000ISO 15792-1:2000/A1: 2011ISO 15792-3ISO 80000-1:2009ISO 6847ISO 13916购买本文件时提供的所有当前修订版均包含在购买本文件中。

BS EN ISO 17634:2015 specifies requirements for classification of tubular cored electrodes used in the post-weld heat-treated condition for gas shielded metal arc welding of creep-resisting and low alloy elevated temperature steels. One tubular cored electrode can be tested and classified with different shielding gases.This International Standard is a combined specification providing for classification utilizing a system based upon the chemical composition of all-weld metal or utilizing a system based upon the tensile strength and the chemical composition of all-weld metal.Paragraphs and tables which carry the suffix letter "A" are applicable only to tubular cored electrodes classified to the system based upon chemical composition with requirements for the yield strength and the average impact energy of 47 J of all-weld metal in accordance with this International Standard.Paragraphs and tables which carry the suffix letter "B" are applicable only to tubular cored electrodes classified to the system based upon the tensile strength and chemical composition of allweld metal in accordance with this International Standard.Paragraphs and tables which have neither the suffix letter "A" nor the suffix letter "B" are applicable to all tubular cored electrodes classified in accordance with this International Standard.It is recognized that the operating characteristics of tubular cored electrodes can be modified by the use of pulsed current, but for the purposes of this International Standard, pulsed current is not used for determining the electrode classification.Cross References:ISO 544ISO 3690ISO 6947ISO 14175ISO 14344ISO 15792-1:2000ISO 15792-1:2000/A1:2011ISO 15792-3ISO 80000-1:2009ISO 6847ISO 13916All current amendments available at time of purchase are included with the purchase of this document.