IEC 62129的本部分描述了使用光学频率梳作为内部参考的光学频率计的校准。它适用于测量光纤通信行业典型光源发出的光频率的仪器。假设光辐射将通过单模光纤耦合到光频率计。本文件是关于波长/光学频率测量仪器校准的IEC 62129系列的一部分。参考IEC 62129-1 [3] 有关光谱分析仪的校准，请参考IEC 62129- 2[4]用于校准 迈克尔逊干涉仪单波长计。交叉引用:IEC 60825-1ISO/IEC指南98-3:2008EN 60825-2IEC TR 61931EN IEC 60793-2-1IEC 60793-2-50IEC 60825-2ITU-T建议G.695ITU-T建议G.694.1EN ISO/IEC 17025EN IEC 61315IEC 60359EN 62129-1ISO/IEC 17025IEC 62129-1IEC 61315EN 60359IEC 62129-2:2011EN 62129-2:2011ISO/IEC指南99:2007购买时可用的所有当前修订均包含在购买本文件。

This part of IEC 62129 describes the calibration of optical frequency meters using an optical frequency comb as an internal reference. It is applicable to instruments measuring the optical frequency emitted from sources that are typical for the fibre-optic communications industry. It is assumed that the optical radiation will be coupled to the optical frequency meter by a single-mode optical fibre. This document is part of the IEC 62129 series on the calibration of wavelength/optical frequency measurement instruments. Refer to IEC 62129-1 [3] for the calibration of optical spectrum analyzers, and refer to IEC 62129-2 [4] for calibration of Michelson interferometer single wavelength meters.Cross References:IEC 60825-1ISO/IEC Guide 98-3:2008EN 60825-2IEC TR 61931EN IEC 60793-2-50EN 60825-1IEC 60793-2-50IEC 60825-2ITU-T Recommendation G.695ITU-T Recommendation G.694.1EN ISO/IEC 17025EN IEC 61315IEC 60359EN 62129-1ISO/IEC 17025IEC 62129-1IEC 61315EN 60359IEC 62129-2:2011EN 62129-2:2011ISO/IEC Guide 99:2007All current amendments available at time of purchase are included with the purchase of this document.