本文件仅适用于二甲醚加油接头（以下简称装置）， 完全由新的、未使用的零件和材料制成。二甲醚加油接头组成 以下部件中，如适用: a） 喷嘴（安装在分配器侧）。b） 插座（安装在车辆上）。 本文件适用于使用二甲醚作为燃料的装置，以下简称本文件 文件格式为D15[见9.1 c）]。 本文件适用于具有标准化配套组件的设备。 本文件适用于防止二甲醚车辆使用燃油的连接器 其他气体燃料的加油站。 本文件适用于:符合ISO 16861的二甲醚。 注:本文件中提及的所有压力（kPa）均视为表压，除非 另有规定。交叉引用:ISO 1431-1ISO 16861ISO 9227ISO 188ISO 1817ASTM D4814ISO 11114-2IEC 60079-0ISO 6957ASTM D7901EN 10204购买时可用的所有当前修订版均包含在本文件的购买中。

This document applies only to Dimethyl Ether refuelling connectors hereinafter referred to as devices, constructed entirely of new, unused parts and materials. Dimethyl Ether refuelling connectors consist of the following components, as applicable: a) Nozzle (mounted on dispenser side).b) Receptacle (mounted on vehicle). This document applies to devices which use Dimethyl Ether as fuel, hereinafter referred to in this document as D15 [see 9.1 c)]. This document applies to devices with standardised mating components. This document applies to connectors which prevent Dimethyl Ether vehicles from being fuelled by fuel station dispensers for other gaseous fuels. This document is applicable to: Dimethyl Ether in accordance with ISO 16861. NOTE All references to pressures (kPa) throughout this document are considered gauge pressures unless otherwise specified.Cross References:ISO 1431-1ISO 16861ISO 9227ISO 188ISO 1817ASTM D4814ISO 11114-2IEC 60079-0ISO 6957ASTM D7901EN 10204All current amendments available at time of purchase are included with the purchase of this document.