IEC 60335-2-7:20 24 CMV包含官方标准及其注释版本。注释版本为您提供了一种快速简单的方法来比较IEC 60335-2-7:20 24版9.0和之前的IEC 60335-2-7:20 19版8.0之间的所有更改。此外，还提供了IEC TC 61专家的意见，以解释最相关变更的原因，或澄清内容的任何部分。 IEC 60335-2-7:20 24涉及用于洗涤衣物和纺织品的家用和类似用途电动洗衣机的安全性，单相电器的额定电压不超过250 V，其他电器包括直流（DC）供电电器和电池供电电器的额定电压不超过480 V。本标准还涉及使用电解质代替洗涤剂的家用和类似用途的电动洗衣机的安全性。不是供一般家庭使用，但仍可能对公众构成危险的电器，如供外行在商店、轻工业和农场使用的电器，均属本标准的范围。 在可行的情况下，本标准涉及洗衣机带来的常见危害，这些危害是家庭中和家庭周围的所有人都会遇到的。然而，一般来说，它没有考虑到: -身体、感官或精神能力受损的人（包括儿童）；或缺乏经验和知识使他们无法在没有监督或指导的情况下安全使用器具； -儿童在玩电器。 提请注意以下事实: -对于拟用于车辆或船舶或飞机上的洗衣机，可能需要附加要求；-在许多国家，国家卫生当局、负责劳动保护的国家当局、国家供水当局和类似当局规定了额外的要求。 本标准不适用于: -专用于工业用途的洗衣机(ISO 10472-2)； -拟在有特殊条件的地方使用的器具，例如存在腐蚀性或爆炸性气氛（灰尘、蒸汽或气体）； -装有蒸汽发生装置的洗衣机，其中在超过50kPa的压力下产生蒸汽； -商用洗衣机，包括公寓或洗衣房公用洗衣机（IEC 60335-2-122）。 本第九版取消并取代2019年出版的第八版。本版构成技术修订版。 与上一版相比，此版本包括以下重大技术变更: a)符合IEC 60335-1:20 20； b)将一些注释转换为规范性文本（第1、20.104、20.105条）； c)增加了重新启动搅拌器洗衣机和叶轮洗衣机旋转循环的要求(20.108)； d)增加了远程操作的要求(22.51)； e)已经介绍了测试探针19的应用(8.1.1、20.2)。 本第2部分应与最新版本的IEC 60335-1及其修订一起使用，除非该版本排除了本第2部分；在这种情况下，使用不排除它的最新版本。它是在该标准第六版（2020年）的基础上建立的。

IEC 60335-2-7:2024 CMV contains both the official standard and its commented version. The commented version provides you with a quick and easy way to compare all the changes between IEC 60335-2-7:2024 edition 9.0 and the previous IEC 60335-2-7:2019 edition 8.0. Furthermore, comments from IEC TC 61 experts are provided to explain the reasons of the most relevant changes, or to clarify any part of the content.

IEC 60335-2-7:2024 deals with the safety of electric washing machines for household and similar use, that are intended for washing clothes and textiles, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances including direct current (DC) supplied appliances and battery-operated appliances. This standard also deals with the safety of electric washing machines for household and similar use employing an electrolyte instead of detergent. Appliances not intended for normal household use but which nevertheless can be a source of danger to the public, such as appliances intended to be used by laymen in shops, in light industry and on farms, are within the scope of this standard.
As far as is practicable, this standard deals with the common hazards presented by washing machines that are encountered by all persons in and around the home. However, in general, it does not take into account:
- persons (including children) whose: physical, sensory or mental capabilities; or lack of experience and knowledge prevents them from using the appliance safely without supervision or instruction;
- children playing with the appliance.
Attention is drawn to the fact that:
- for washing machines intended to be used in vehicles or on board ships or aircraft, additional requirements can be necessary;
- in many countries additional requirements are specified by the national health authorities, the national authorities responsible for the protection of labour, the national water supply authorities and similar authorities.
This standard does not apply to:
- washing machines intended exclusively for industrial purposes (ISO 10472-2);
- appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas);
- washing machines incorporating steam generating devices in which steam is produced at a pressure exceeding 50 kPa;
- washing machines for commercial use including those for communal use in blocks of flats or in launderettes (IEC 60335-2-122).
This ninth edition cancels and replaces the eighth edition published in 2019. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) alignment with IEC 60335-1:2020;
b) conversion of some notes to normative text (Clause 1, 20.104, 20.105);
c) addition of requirements for restarting the spin cycle of agitator washing machines and impeller washing machines (20.108);
d) addition of requirements for remote operation (22.51);
e) application of test probe 19 has been introduced (8.1.1, 20.2).
This part 2 is to be used in conjunction with the latest edition of IEC 60335-1 and its amendments unless that edition precludes it; in that case, the latest edition that does not preclude it is used. It was established on the basis of the sixth edition (2020) of that standard.