BS EN 12642:2016适用于商用车和挂车的车身结构。本欧洲标准规定了标准车身（侧壁、， 并规定了适当的试验。本欧洲标准适用于所有商用车辆，其设计和车身类型与 身体结构如下所述。根据下述测试要求施加的力可用于负载固定 目的。车辆地板是副车架的一部分。只要未定义地板强度，则 制造商应提供必要的信息。应对地板上的轴负载进行测试 类似于EN 283进行。结果应按照第6章的规定标记在位置上。根据ISO 27956，本欧洲标准不适用于厢式货车。交叉引用:EN 12195-1:2010EN 283EN 12640EN 12641-1EN 12641-2ISO 27956购买本文件时可获得的所有现行修订均包含在购买本文件中。

BS EN 12642:2016 applies to body structures on commercial vehicles and on trailers.This European Standard sets out basic minimum requirements for standard vehicle bodies (side walls, front and rear walls) and for reinforced vehicle bodies and specifies appropriate tests.This European Standard applies to all commercial vehicles which are related by design and body type to the body structures described below.Forces applied according to the test requirements described below can be invoked for load securing purposes.The floor of the vehicle is a part of the sub frame. As long as the floor strength is not defined, the manufacturer should give the necessary information. Testing of the axle load on the floor should be carried out analogous to EN 283. The result should be marked in locations according to chapter 6.This European Standard does not apply to vans according to ISO 27956.Cross References:EN 12195-1:2010EN 283EN 12640EN 12641-1EN 12641-2ISO 27956All current amendments available at time of purchase are included with the purchase of this document.