ISO 8143:2010规定了工厂生产的硅酸钙产品的要求，这些产品用于工作温度高达+1100°C左右的工业装置和建筑设备的隔热。 注:硅酸钙产品可在低于0°C的温度下使用。对于低于0°C的工作温度，建议进行有关产品在预期用途中适用性的特殊试验（例如氧气液化）。在任何情况下，建议咨询制造商的意见。 产品以板材、管段、管段和预制件的形式制造。 ISO 8143:2010描述了产品特性，包括测试、一致性评估、标记和标签程序。 ISO 8143:2010涵盖的产品也用于预制隔热系统和复合板；不包括包含这些产品的系统的结构性能。

ISO 8143:2010 specifies the requirements for factory-made calcium silicate products which are used for thermal insulation of industrial installations and building equipment with an operating temperature of up to approximately +1 100 °C. NOTE Calcium silicate products can be used at temperatures lower than 0 °C. For operating temperatures below 0 °C, special tests, regarding the suitability of the product in the intended application, are advised (e.g. liquefaction of oxygen). It is advisable to seek the advice of the manufacturer(s) in all cases. The products are manufactured in the form of boards, pipe sections, segments and prefabricated ware. ISO 8143:2010 describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling. Products covered by ISO 8143:2010 are also used in prefabricated thermal insulation systems and composite panels; the structural performance of systems incorporating these products is not covered.