BS EN 13165:2012+A2:2016规定了工厂制硬质聚氨酯泡沫（PU）的要求 用于建筑物隔热的有或无饰面或涂层的产品。聚氨基甲酸酯 包括PIR和PUR产品。这些产品是以板的形式制造的。本欧洲标准包括PU多层隔热产品，见附录D。本标准涵盖的产品也用于预制隔热系统和 复合绝缘产品；包含这些产品的系统的性能并不理想 盖满。本标准描述了产品特性，包括测试、评估 符合性、标记和标签。本标准未规定产品所需达到的特定性能水平 证明在特定应用中的适用性。给定应用程序所需的级别 可在法规或非冲突标准中找到。声明热阻低于0.25 m2^2K/W或声明热阻的产品 本欧洲标准不包括10°C下大于0060 W/（m.K）的电导率。本标准不包括现场保温产品和拟用于现场保温的产品 建筑设备和工业装置的绝缘（由EN 14308涵盖）。 交叉引用:EN 822EN 823EN 824EN 826EN 1604EN 1606EN 1607EN 1609EN 12086:1997EN 12087EN 12667:2001EN 12939EN 13172:2012EN 13501-1EN 13820EN 13823EN 15715:2009EN ISO 354ISO 354EN ISO 1182ISO 1182EN ISO 1716EN ISO 4590ISO 4590EN ISO 9229:2007ISO 9229:2007EN ISO 11654EN ISO 11925-2ISO 11925-2ISO 16269-6:2005ASTM D 3985EN 12088EN 12089EN 12091EN14308EN ISO 10456ISO 10456包含以下内容:修订，2016年6月。修订并替换BS EN 13165:2012。修订和替换BS EN 13165:2012+A1:2015

BS EN 13165:2012+A2:2016 specifies the requirements for factory made rigid polyurethane foam (PU) products, with or without facings or coatings, which are used for the thermal insulation of buildings. PU includes both PIR and PUR products. The products are manufactured in the form of boards.This European Standard includes PU multi-layered insulation products, see Annex D.Products covered by this standard are also used in prefabricated thermal insulation systems and composite insulation products; the performance of systems incorporating these products is not covered.This standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling.This standard does not specify the required level of a given property to be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application are to be found in regulations or non-conflicting standards.Products with a declared thermal resistance lower than 0,25 m2^2K/W or a declared thermal conductivity greater than 0,060 W/(m.K) at 10 °C are not covered by this European Standard.This standard does not cover in situ insulation products and products intended to be used for the insulation of building equipment and industrial installations (covered by EN 14308).Cross References:EN 822EN 823EN 824EN 825EN 826EN 1604EN 1605EN 1606EN 1607EN 1609EN 12086:1997EN 12087EN 12667:2001EN 12939EN 13172:2012EN 13501-1EN 13820EN 13823EN 15715:2009EN ISO 354ISO 354EN ISO 1182ISO 1182EN ISO 1716ISO 1716EN ISO 4590ISO 4590EN ISO 9229:2007ISO 9229:2007EN ISO 11654ISO 11654EN ISO 11925-2ISO 11925-2ISO 16269-6:2005ASTM D 3985EN 1602EN 12088EN 12089EN 12090EN 12091EN 14308EN ISO 10456ISO 10456Incorporates the following:Amendment, June 2016. Amends and replaces BS EN 13165:2012. Amends and replaces BS EN 13165:2012+A1:2015