首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
历史 ASTM F1742-03(2020)
到馆提醒
收藏跟踪
购买正版
Standard Specification for PVC Insulating Sheeting PVC绝缘片标准规范
发布日期: 2020-01-01
1.1 本规范涵盖了用于保护工人的聚氯乙烯绝缘板的验收测试。 1.2 以下安全危险警告仅适用于试验方法部分,章节 17 – 19 ,本规范: 本标准并非旨在解决与其使用相关的所有安全问题(如有)。本标准的用户有责任在使用前制定适当的安全、健康和环境实践,并确定监管限制的适用性。 1.3 本国际标准是根据世界贸易组织技术性贸易壁垒(TBT)委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。
1.1 This specification covers acceptance testing of Poly Vinyl Chloride insulating sheeting for use as a covering for protection of workers. 1.2 The following safety hazards caveat applies only to the test method portion, Sections 17 – 19 , of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
分类信息
关联关系
研制信息
归口单位: F18.25
相似标准/计划/法规
现行
ASTM F1742-03(2024)
Standard Specification for PVC Insulating Sheeting
PVC绝缘片标准规范
2024-09-01
现行
BS 3757-1978
Specification for rigid PVC sheet
硬质聚氯乙烯薄板规范
1978-12-29
现行
ASTM F2320-18(2022)
Standard Specification for Rubber Insulating Sheeting
橡胶绝缘薄板标准规范
2022-12-01
现行
BS 4023-1975
Specification for flexible cellular PVC sheeting
软质多孔PVC薄板规范
1975-02-28
现行
ASTM C1917-23
Standard Specification for Rigid Polyvinyl Chloride (PVC) Jacketing for Insulation
绝缘用硬质聚氯乙烯(PVC)护套的标准规范
2023-11-15
现行
BS 3878-1982
Specification for flexible PVC sheeting for hospital use
医院用软聚氯乙烯薄膜规范
1982-02-26
现行
GOST 6323-1979
Провода с поливинилхлоридной изоляцией для электрических установок. Технические условия
电气设备用PVC绝缘电线 规格
现行
DIN 16959
Sheets of plasticized polyvinylchlorid (PVC); technical delivery specifications
增塑聚氯乙烯(PVC)片材;技术交付规范
1973-09-01
现行
BS PAS 5308-2-2009
Control and instrumentation cables-Specification for PVC insulated cables
控制和仪表电缆
2009-07-31
现行
GOST 18404.3-1973
Кабели управления с полиэтиленовой изоляцией в оболочке из поливинилхлоридного пластиката. Технические условия
PE绝缘PVC护套控制电缆 规格
现行
KS C IEC 60684-3-100
플렉시블 절연 슬리빙 — 제3부: 슬리빙의 개별 형태에 대한 사양 — 제100∼105절: 압출 염화비닐 슬리빙
柔性绝缘套管 - 第3部分:针对各种类型套管的规格 - 板材100至105:挤压型PVC套管
2017-04-26
现行
IEC 60684-3-100-2001
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 100 to 105: Extruded PVC sleeving
柔性绝缘套管 - 第3部分:针对各种类型套管的规格 - 板材100至105:挤压型PVC套管
2001-07-10
现行
KS C IEC 60684-3-100(2022 Confirm)
플렉시블 절연 슬리빙 — 제3부: 슬리빙의 개별 형태에 대한 사양 — 제100∼105절: 압출 염화비닐 슬리빙
绝缘软套管.第3部分:各类套管规范.第100至105页:挤压PVC套管
2017-04-26
现行
UNE-EN 60684-3-100 A 105-2002
Flexible insulating sleeving -- Part 3: Specifications for individual types of sleeving -- Sheets 100 to 105: Extruded PVC sleeving.
绝缘软套管第3部分:各种型号套管规范活页100至105:挤塑PVC套管
2002-09-30
现行
BS 4203-1-1980
Extruded rigid PVC corrugated sheeting-Specification for performance requirements
挤塑硬质PVC波纹板 性能要求规范
1980-04-30
现行
BS 4203-2-1980
Extruded rigid PVC corrugated sheeting-Specification for profiles and dimensions
挤塑硬质PVC波纹板 型材和尺寸规范
1980-04-30
现行
ASTM D8427-21
Standard Specification for Rigid Poly Vinyl Chloride (PVC) Exterior Profiles Used for Sheet Piling
板桩用硬质聚氯乙烯(PVC)外部型材的标准规范
2021-12-01
现行
BS 4808-1-1972
Specification for L.F. cables and wires with PVC insulation and PVC sheath for telecommunication-General requirements and tests
通信用聚氯乙烯绝缘聚氯乙烯护套低频电缆和电线规范 一般要求和试验
1972-03-14
现行
GOST 5960-1972
Пластикат поливинилхлоридный для изоляции и защитных оболочек проводов и кабелей. Технические условия
柔性PVC用于电线和电缆的绝缘和保护套 规格
现行
GOST 7866.2-1976
Кабели судовые с резиновой изоляцией в оболочке из поливинилхлоридного пластиката. Технические условия
橡胶绝缘柔性PVC护套船用电缆 规格