本文件规定了锻铝和锻铝合金板材，条板和板材的一般用途检验和交货的技术条件。它还包括订购和测试的规定。 适用于厚度在0,20 mm以上且包括400 mm的产品。 对于铝带，板材和板材的许多特殊应用，存在具体的欧洲标准，其中规定了不同的或额外的要求，并选择了合适的合金和温度:参见附录A.这些特殊的欧洲标准中的大多数是指本文件的规定。 选择相关的特殊欧洲标准由买方负责。 每当应用涉及特殊性能，如耐腐蚀性，韧性，疲劳强度，表面外观和焊接性能时，用户应咨询供应商，并酌情考虑相关的特殊欧洲标准

This document specifies the technical conditions for inspection and delivery of wrought aluminium and wrought aluminium alloy sheet, strip and plate for general applications. It also includes provisions for ordering and testing. It applies to products with a thickness over 0,20 mm up to and including 400 mm. For many special applications of aluminium strip, sheet and plate, specific European Standards exist, where different or additional requirements are formulated and the appropriate alloys and tempers are selected: see Annex A. Most of these special European Standards refer to provisions of this document. The selection of the relevant special European Standards is under the responsibility of the purchaser. Whenever the application involves special properties, such as corrosion resistance, toughness, fatigue strength, surface appearance and welding properties, the user should consult the supplier and consider the relevant special European Standard, as applicable.