ISO 23369:2022-液压传动.在循环流动条件下评价过滤元件过滤性能的多通道方法-国家数字标准馆

现行 ISO 23369:2022

到馆阅读

收藏跟踪

购买正版

Hydraulic fluid power — Multi-pass method of evaluating filtration performance of a filter element under cyclic flow conditions 液压传动.在循环流动条件下评价过滤元件过滤性能的多通道方法

发布日期： 2022-12-19

本文件规定:
A）？液压油动力滤芯在连续污染物注入的循环流动条件下的多通过滤性能试验。
b）？确定污染物容量、颗粒去除和压差特性的程序。
c）？目前适用于粒径≤25时平均过滤比大于或等于75的液压油动力滤芯的测试？μ m（c），最终测试系统储层重量水平小于200？毫克/升。有必要通过验证确定可用于测试设施的流速范围和粒度下限。
d）？使用ISO的测试？12103？1 A3介质测试粉尘污染物和测试流体。
本文件提供了一种测试程序，其产生可再现的测试数据，用于评估液压流体动力过滤器元件的过滤性能，而不受静电电荷的影响。本文件适用于三种试验条件:
—？基础上游重量水平为3？毫克/升；
—？基础上游重量水平为10？毫克/升；
—？基础上游重量水平为15？毫克/升。

This document specifies:
a)？A multi-pass filtration performance test under cyclic flow conditions with continuous contaminant injection for hydraulic fluid power filter elements.
b)？A procedure for determining the contaminant capacity, particulate removal and differential pressure characteristics.
c)？A test currently applicable to hydraulic fluid power filter elements that exhibit an average filtration ratio greater than or equal to 75 for particle sizes ≤25？μm(c), and a final test system reservoir gravimetric level of less than 200？mg/L. It is necessary to determine by validation the range of flow rates and the lower particle size limit that can be used in test facilities.
d)？A test using ISO？12103？1 A3 medium test dust contaminant and a test fluid.
This document provides a test procedure that yields reproducible test data for appraising the filtration performance of a hydraulic fluid power filter element without influence of electrostatic charge.
This document is applicable to three test conditions:
—？Base upstream gravimetric level of 3？mg/L;
—？Base upstream gravimetric level of 10？mg/L;
—？Base upstream gravimetric level of 15？mg/L.