Communication cables - Part 2-1: Common design rules and construction; German version EN 50290-2-1:2005
通信电缆.第2-1部分:通用设计规则和结构；德文版EN 50290-2-1:2005

2005-10-01

Communication cables - Specifications for test methods - Part 1-2: Electrical test methods; DC resistance; German version EN 50289-1-2:2001
通信电缆.试验方法规范.第1-2部分:电气试验方法；直流电阻；德文版EN 50289-1-2:2001

2002-02-01

Multi-element metallic cables used in analogue and digital communication and control - Part 2-1: Sectional specification for screened cables characterised up to 100 MHz - Horizontal and building backbone cables; German version EN 50288-2-1:2003
模拟和数字通信及控制用多元金属电缆.第2-1部分:100MHz以下屏蔽电缆分规范.水平和建筑主干电缆；德文版EN 50288-2-1:2003

2004-08-01

Multi-element metallic cables used in analogue and digital communication and control - Part 8: Specification for type 1 cables characterised up to 2 MHz; German version EN 50288-8:2012
模拟和数字通信及控制用多元金属电缆.第8部分:2MHz以下1型电缆规范；德文版EN 50288-8:2012

2012-09-01

Multi-element metallic cables used in analogue and digital communications and control - Part 12-1: Sectional specification for screened cables characterised from 1 MHz up to 2 000 MHz - Horizontal and building backbone cables; German version EN 50288-12-1:2017
模拟和数字通信及控制用多元金属电缆.第12-1部分:1MHz至2000MHz屏蔽电缆分规范.水平和建筑主干电缆；德文版EN 50288-12-1:2017

2018-04-01

Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 17-1: Type FPFT (factory polished field terminated) simplex connector factory terminated with EN 60793-2-50 category B1.3 fibre and field mounted onto IEC 60793-2-50 category B1.3 or B6a 1 or B6a 2 singlemode fibre, category C; German version EN 50377-17-1:2013
光纤通信系统中使用的连接器组和互连组件.产品规范.第17-1部分:工厂抛光现场端接的FPFT型单工连接器.工厂端接的EN 60793-2-50 B1类 3光纤和现场安装在IEC 60793-2-50类别上

2014-08-01

Medium power transformers 50 Hz, with highest voltage for equipment not exceeding 36 kV - Part 3: Transformers with cable boxes on the high-voltage and/or low-voltage side - Cable boxes type 1 for use on transformers meeting the requirements of EN 50588-2; German version EN 50588-3:2018
最高电压不超过36kV的设备用50Hz中型电力变压器.第3部分:高压和/或低压侧带电缆盒的变压器.满足EN 50588-2要求的变压器用1型电缆盒；德文版EN 50588-3:2018

2019-12-01

Connector sets and Interconnect components to be used in optical fibre communication systems - Product specifications - Part 17-2: Type FPFT (factory polished field terminated) simplex connector factory terminated with EN 60793-2-50 category B1.3 fibre and field mounted onto reinforced cable containing IEC 60793-2-50 category B1.3 or B6a 1 or B6a 2 singlemode fibre (with restricted MFD), category C; German version EN 50377-17-2:2015
光纤通信系统中使用的连接器组和互连组件.产品规范.第17-2部分:工厂抛光现场端接的FPFT型单工连接器.工厂端接的EN 60793-2-50 B1类 3光纤和现场安装在加固电缆上

2015-11-01

Multi-element metallic cables used in analogue and digital communication and control - Part 9-2: Sectional specification for screened cables characterized from 1 MHz up to 1000 MHz for work area, patch cord and data centre applications; German version EN 50288-9-2:2015
模拟和数字通信及控制用多元金属电缆.第9-2部分:工作区、跳线和数据中心用1MHz至1000MHz屏蔽电缆分规范；德文版EN 50288-9-2:2015

2016-04-01

Multi-element metallic cables used in analogue and digital communication and control - Part 10-2: Sectional specification for screened cables characterized from 1 MHz up to 500 MHz for work area, patch cord and data centre applications; German version EN 50288-10-2:2015
模拟和数字通信及控制用多元金属电缆.第10-2部分:工作区、跳线和数据中心用1MHz至500MHz屏蔽电缆分规范；德文版EN 50288-10-2:2015

2016-04-01

Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 11-1: Type MF terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre for category C; German version EN 50377-11-1:2008
光纤通信系统中使用的连接器组件和互连组件.产品规范.第11-1部分:端接在IEC 60793-2-50 B1类上的MF型 1和B1 3 C类单模光纤；德文版EN 50377-11-1:2008

2008-09-01

Multi-element metallic cables used in analogue and digital communication and control - Part 11-2: Sectional specification for un-screened cables, characterized from 1 MHz up to 500 MHz for work area, patch cord and data centre applications; German version EN 50288-11-2:2015
模拟和数字通信及控制用多元金属电缆.第11-2部分:工作区、跳线和数据中心用1 MHz至500 MHz无屏蔽电缆分规范；德文版EN 50288-11-2:2015

2016-04-01

Industrial connector sets and interconnect components to be used in optical fibre control and communication systems - Product specifications - Part 3-1: Type ODVA APC terminated on EN 60793-2-50 category B1.1 and B1.3 singlemode fibre to meet the requirements of category I (industrial environments) as specified in EN 50173-1 and IEC 61753-1-3; German version EN 50516-3-1:2014
光纤控制和通信系统中使用的工业连接器组件和互连组件.产品规范.第3-1部分:端接在EN 60793-2-50 B1类上的ODVA APC型 1和B1 3单模光纤 满足I类（工业环境）的要求

2015-09-01

Passive components to be used in optical fibre communication systems - Product specifications - Part 3-1: Type: 100/200 GHz DWDM module terminated on IEC 60793-2-50 category B1.1 and B1.3 single mode fibre; German version EN 50378-3-1:2007
光纤通信系统中使用的无源元件.产品规范.第3-1部分:类型:端接在IEC 60793-2-50 B1类上的100/200GHz DWDM模块 1和B1 3单模光纤；德文版EN 50378-3-1:2007

2008-02-01

Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 16-1: Type LF3 APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with titanium composite ferrule for category C; German version EN 50377-16-1:2011
光纤通信系统中使用的连接器组件和互连组件.产品规范.第16-1部分:端接在IEC 60793-2-50 B1类上的LF3型APC单工连接器 1和B1 3 C类单模光纤 带钛复合金属箍；德文版EN 50377-16-1:20

2013-02-01

Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 15-1: Type MPO with 12-fibre PPS ferrules terminated on IEC 60793-2 category A1a multimode fibre for 50/125 micron multimode fibre; German version EN 50377-15-1:2011
光纤通信系统中使用的连接器组和互连组件.产品规范.第15-1部分:端接在IEC 60793-2 A1a类多模光纤上的12芯PPS套管的MPO型50/125微米多模光纤；德文版EN 50377-15-1:2011

2012-01-01

Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 10-1: Type MU-PC Simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category C; German version EN 50377-10-1:2007
光纤通信系统中使用的连接器组件和互连组件.产品规范.第10-1部分:IEC 60793-2-50 B1类端接的MU-PC型单工连接器 1和B1 3单模光纤 带C类全氧化锆套圈；德文版EN 50377-10-1:2007

2008-01-01

Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 18-1: type 4+4x10.3125 Gb/s MPO (QFSP) transceiver mated with an MPO connector equipped with 12 fibre PPS ferrules terminated on EN 60793-2-10 category A1a.3a or A1a.3b 50/125 micron multimode fibre; German version EN 50377-18-1:2019
光纤通信系统中使用的连接器组件和互连组件.产品规范.第18-1部分:4+4x10型 3125 Gb/s MPO（QFSP）收发器与MPO连接器匹配 MPO连接器配有12根端接在EN 60793-2-10 A1a类上的光纤PPS套管 3a或A1a 3b 50/125

2019-11-01