DIN 2249-5-Gemetral product Specification（GPS）-“不合格”测量构件.第5部分:公称直径大于40mm至250mm的精密机械用圆柱形测量构件-国家数字标准馆

现行 DIN 2249-5

到馆提醒

收藏跟踪

购买正版

Gemetrical product specifications (GPS) - "NOT GO" gauging members - Part 5: Cylindrical gauging members for holes over 40 mm up to 250 mm nominal diameter for precision mechanics Gemetral product Specification（GPS）-“不合格”测量构件.第5部分:公称直径大于40mm至250mm的精密机械用圆柱形测量构件

发布日期： 2008-07-01

分类信息

发布单位或类别：德国-德国标准化学会

关联关系

研制信息

相似标准/计划/法规

Geometrical product specifications (GPS) - "NOT GO" gauging members - Part 4: Cylindrical gauging members for holes over 40 mm up to 120 mm nominal diameter
产品几何技术规范（GPS）-“不合格”测量构件.第4部分:公称直径大于40mm至120mm的孔用圆柱形测量构件

Geometrical product specifications (GPS) - "NOT GO" gauging members - Part 3: Segmental cylindrical gauging members for holes over 120 mm up to 200 mm nominal diameter
产品几何技术规范（GPS）-“不合格”测量构件.第3部分:公称直径超过120mm至200mm的孔用分段圆柱形测量构件

Geometrical product specifications (GPS) - "NOT GO" gauging members - Part 2: Rod gauge for holes over 40 mm up to 500 mm nominal diameter
产品几何技术规范（GPS）-“不合格”测量构件.第2部分:公称直径大于40mm至500mm的孔用杆规

Geometrical product specifications (GPS) - "NOT GO" plug gauges - Part 3: With cylindrical gauging member for holes over 40 mm up to 120 mm nominal diameter
产品几何技术规范（GPS）-“止动”塞规.第3部分:公称直径大于40mm至120mm的孔用圆柱形测量构件

Geometrical product specifications (GPS) - "NOT GO" plug gauges - Part 4: With segmental cylindrical gauging member over 120 mm up to 200 mm nominal diameter
产品几何技术规范（GPS）-“不合格”塞规.第4部分:标称直径超过120mm至200mm的分段圆柱形测量构件

Geometrical product specifications (GPS) - "GO" gauging members - Part 3: For holes over 120 mm up to 200 mm nominal diameter
产品几何技术规范（GPS）-“GO”测量构件.第3部分:公称直径超过120mm至200mm的孔

Geometrical product specifications (GPS) - "GO" gauging members - Part 2: For holes over 40 mm up to 120 mm nominal diameter
产品几何技术规范（GPS）-“GO”测量构件.第2部分:公称直径大于40mm至120mm的孔

Geometrical product specifications (GPS) - "NOT GO" plug gauges - Part 5: With cylindrical gauging member for holes over 40 mm up to 250 mm nominal diameter for precision mechanics
产品几何技术规范（GPS）-“止动”塞规.第5部分:精密机械用公称直径大于40mm至250mm的孔用圆柱形测量构件

Geometrical product specifications (GPS) - "GO" gauging members - Part 4: For holes over 40 mm up to 250 mm nominal diameter for precision mechanics
产品几何技术规范（GPS）-“GO”测量构件.第4部分:精密机械用公称直径大于40mm至250mm的孔

Geometrical product specifications (GPS) - NOT GO screw gauging members for workshop plug gauges and check plugs for ISO metric screw threads with nominal diameters over 40 mm up to 250 mm in precision engineering
产品几何技术规范（GPS）-“不合格”螺纹量规件-第3部分:精密机械用公称直径超过40mm至250mm的ISO公制螺纹的“不合格”车间量规和检查塞规

Geometrical product specifications (GPS) - GO screw gauging members for workshop plug gauges and check plugs for ISO metric screw threads with nominal diameters over 40 mm up to 250 mm, for use in precision engineering
产品几何技术规范（GPS）-“GO”螺纹量规件.第3部分:精密工程用公称直径超过40mm至250mm的ISO公制螺纹的“GO”车间量规和检查塞规

Geometrical product specifications (GPS) - NOT GO screw gauging members for workshop plug gauges, check plugs and setting plugs for general purpose ISO metric screw threads with nominal diameters over 40 mm up to 200 mm
产品几何技术规范（GPS）-“不合格”螺纹量规件-第2部分:“不合格”车间量规 ISO通用米制螺纹公称直径超过40mm至200mm的检查和设置塞规

Geometrical product specifications (GPS) - GO screw gauging members for workshop plug gauges, check plugs and setting plugs for general purpose ISO metric screw threads with nominal diameters over 40 mm up to 200 mm
产品几何技术规范（GPS）-“GO”螺纹量规件.第2部分:ISO通用公制螺纹公称直径大于40mm小于200mm的“GO”车间量规、检查和设置量规件

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统