ISO 16063-22:20 05规定了用于直线传感器二次冲击校准的仪器和程序，使用时间相关冲击的参考加速度、速度或力测量。这些方法适用于0.05 ms至8.0 ms的冲击脉冲持续时间范围和100 m/s至100 km/s2（时间相关）的动态范围（峰值）。这些方法允许获得换能器冲击灵敏度（即换能器输出量的峰值和加速度之间的关系）。 这些方法不适用于模态分析中使用的动态力传感器的校准。

ISO 16063-22:2005 specifies the instrumentation and procedures to be used for secondary shock calibration of rectilinear transducers, using a reference acceleration, velocity or force measurement for the time-dependent shock. The methods are applicable in a shock pulse duration range of 0,05 ms to 8,0 ms, and a dynamic range (peak value) of 100 m/s to 100 km/s² (time-dependent). The methods allow the transducer shock sensitivity (i.e. the relationship between the peak values of the transducer output quantity and the acceleration) to be obtained. These methods are not intended for the calibration of dynamic force transducers used in modal analysis.