首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 ГОСТ 25828-83
到馆阅读
收藏跟踪
购买正版
Гептан нормальный эталонный. Технические условия 标准正庚烷 规格
实施日期: 1984-07-01
本标准适用于参考正庚烷,被用作试剂和在确定马达和航空汽油和马达部件和研究方法级航空汽油浓混合的辛烷值基准燃料
Настоящий стандарт распространяется на эталонный нормальный гептан, применяемый в качестве реактива и эталонного топлива при определении октановых чисел автомобильных и авиационных бензинов и их компонентов моторным и исследовательским методами, сортности авиационных бензинов на богатой смеси
分类信息
关联关系
研制信息
相似标准/计划/法规
现行
KS M 2415(2021 Confirm)
노말헵탄 불용분 시험방법
正庚烷不溶物的标准试验方法
2006-05-02
现行
KS M 2415(2016 Confirm)
노말헵탄 불용분 시험방법
正庚烷不溶物的标准测试方法
2006-05-02
现行
KS M 2415
n-헵테인 불용분 시험방법
正庚烷不溶物的标准试验方法
2023-12-15
现行
ASTM D3279-19
Standard Test Method for n-Heptane Insolubles
标准测试方法 n -Heptane Insoluble
2019-06-15
现行
ASTM D7827-19
Standard Test Method for Measuring n-Heptane Induced Phase Separation of Asphaltene from Heavy Fuel Oils as Separability Number by an Optical Device
标准测试方法测量正庚烷从重油燃料中沥青质相分离作为光学装置的分离数量
2019-12-01
现行
ASTM D7061-23
Standard Test Method for Measuring n-Heptane Induced Phase Separation of Asphaltene-Containing Heavy Fuel Oils as Separability Number by an Optical Scanning Device
用光学扫描装置测量含沥青质重质燃料油的正庚烷诱导相分离作为可分离性数的标准试验方法
2023-12-01
现行
NB/SH/T 0902-2015
含沥青质重质燃料油正庚烷诱导相可分离性值的测定 光学扫描法
Standard test method for measuring n-heptane induced phase separation of asphaltene-containing heavy fuel oil as separability number by an optical scanning device
2015-10-27
现行
ASTM D2268-21
Standard Test Method for Analysis of High-Purity n-Heptane and Isooctane by Capillary Gas Chromatography
毛细管气相色谱法分析高纯度正庚烷和异辛烷的标准试验方法
2021-12-01
现行
ASTM D7157-23
Standard Test Method for Determination of Intrinsic Stability of Asphaltene-Containing Residues, Heavy Fuel Oils, and Crude Oils (n-Heptane Phase Separation; Optical Detection)
测定含沥青质残留物、重质燃料油和原油内在稳定性的标准试验方法(n-庚烷相分离;光学检测)
2023-03-01
现行
ASTM D304-11(2019)
Standard Specification for n-Butyl Alcohol (Butanol)
正丁醇(丁醇)的标准规范
2019-04-01
现行
ASTM D4360-11(2019)
Standard Specification for Methyl n-Amyl Ketone
甲基戊基酮的标准规范
2019-04-01
现行
ASTM D4615-22
Standard Specification for n-Butyl Acetate (All Grades)
乙酸丁酯(所有等级)的标准规范
2022-01-01
现行
ASTM D3622-11(2019)
Standard Specification for 1-Propanol (n-Propyl Alcohol)
正丙醇(正丙醇)的标准规范
2019-04-01
现行
ASTM D3130-11(2019)
Standard Specification for n-Propyl Acetate (96 % Grade)
醋酸丙酯(96 ;%级)的标准规范
2019-04-01
现行
ASTM B649-21
Standard Specification for Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloy and Cr-Ni-Fe-N Low-Carbon Alloy Bar and Wire, Ni-Cr-Fe-Mo-N Alloy Wire, and Ni-Fe-Cr-Mo-N Alloy Bar
Ni-Fe-Cr-Mo-Cu-N低碳合金和Cr-Ni-Fe-N低碳合金棒材和线材、Ni-Cr-Fe-Mo-N合金线材和Ni-Fe-Cr-Mo-N合金棒材的标准规范
2021-11-01
现行
ASTM B625-21
Standard Specification for Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloy, Ni-Fe-Cr-Si Alloy, Cr-Ni-Fe-N Low-Carbon Alloy, Fe-Ni-Cr-Mo-Cu-N Alloy, and Ni-Fe-Cr-Mo-N Alloy Plate, Sheet, and Strip
Ni-Fe-Cr-Mo-Cu-N低碳合金、Ni-Fe-Cr-Si合金、Cr-Ni-Fe-N低碳合金、Fe-Ni-Cr-Mo-Cu-N合金和Ni-Fe-Cr-Mo-N合金板材、薄板和带材的标准规范
2021-11-01
现行
ASTM E235/E235M-23
Standard Specification for Type K and Type N Mineral-Insulated, Metal-Sheathed Thermocouples for Nuclear or for Other High-Reliability Applications
核或其他高可靠性应用的K型和N型矿物绝缘金属护套热电偶标准规范
2023-07-01
现行
DIN EN 300417-3-2
Transmission and Multiplexing (TM) - Generic requirements of transport functionality of equipment - Part 3-2: Synchronous Transport Module N (STM-N) regenerator and multiplex section layer functions; implementation Conformance Statement (ICS) proforma specification (Endorsement of the English version EN 300417-3-2 V 1.1.4 (1999-05) as German Standard)
传输和多路复用(TM).设备传输功能的一般要求.第3-2部分:同步传输模块N(STM-N)再生器和多路复用段层功能;实施合规性声明(ICS)形式规范(英文版背书)
2000-06-01
现行
AWS B2.1-8-318-2016
Standard Welding Procedure Specification for Naval Applications (SWPS-N) for Gas Tungsten Arc Welding of Austenitic Stainless Steel (S-8), 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, MIL-3XX, in the As-Welded Condition, Primarily Pipe for Naval Applications
1/8英寸[3 mm]至1-1/2英寸[38 mm]厚、MIL-3XX、焊态主要用于海军应用的奥氏体不锈钢(S-8)钨极气体保护焊的海军应用标准焊接工艺规范(SWPS-N)
2016-01-01
现行
1A1W1S1 Archive Product 457
Standard Welding Procedure Specification for Naval Applications (SWPS-N) for Gas Tungsten Arc Welding of Austenitic Stainless Steel (S-8), 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, MIL-3XX, in the As-Welded Condition, Primarily Pipe for Naval Applications
1/8英寸[3 mm]至1-1/2英寸[38 mm]厚、MIL-3XX、焊态主要用于海军应用的奥氏体不锈钢(S-8)钨极气体保护焊的海军应用标准焊接工艺规范(SWPS-N)
2016-01-01