本欧洲标准规定了夹钳型配件的设计、材料和尺寸 与公称尺寸DN 15至DN 50的蒸汽和热水软管一起使用的联轴节组件。它涵盖 最大工作压力不超过18 bar的组件（对应于饱和蒸汽 温度为210摄氏度）。交叉引用:EN 10025-2EN ISO 228-1EN ISO 4042EN ISO 4762EN 10283EN 10088-1EN 12168ISO 2859-1EN 22768-2:1993EN 22768-1:1993EN ISO 898-2EN ISO 3506-2EN 10088-2EN ISO 4032EN ISO 15607EN ISO 3506-1EN 10226-1EN 10213EN 10087EN 12420EN 12164EN ISO 898-1EN ISO 8330EN 1092-1EN ISO 4287: 1998EN 10204EN ISO 6708:1995DIN 11851EN ISO 9001包含以下内容:修订，2019年5月；修正案，2017年1月

This European Standard specifies the design, materials and dimensions of fittings for clamp type coupling assemblies for use with nominal sizes DN 15 to DN 50 steam and hot water hoses. It covers assemblies up to a maximum working pressure of 18 bar1) (corresponding to a saturated steam temperature of 210 °C).Cross References:EN 10025-2EN ISO 228-1EN ISO 4042EN ISO 4762EN 10283EN 10088-1EN 12168ISO 2859-1EN 22768-2:1993EN 22768-1:1993EN ISO 898-2EN ISO 3506-2EN 10088-2EN ISO 4032EN ISO 15607EN ISO 3506-1EN 10226-1EN 10213EN 10087EN 12420EN 12164EN ISO 898-1EN ISO 8330EN 1092-1EN ISO 4287:1998EN 10204EN ISO 6708:1995DIN 11851EN ISO 9001Incorporates the following:Amendment, May 2019; Amendment, January 2017