SAE AMS3587E-塑料管电气绝缘辐照聚烯烃着色非常灵活热收缩低回收温度2:1收缩比（稳定:2011年9月）-国家数字标准馆

现行 SAE AMS3587E

到馆提醒

收藏跟踪

购买正版

Plastic Tubing, Electrical Insulation Irradiated Polyolefin, Pigmented, Very Flexible, Heat-Shrinkable Low Recovery Temperature 2 to 1 Shrink Ratio (Stabilized: Sep 2011) 塑料管电气绝缘辐照聚烯烃着色非常灵活热收缩低回收温度2:1收缩比（稳定:2011年9月）

发布日期： 2011-09-01

本文件已被宣布为“稳定”，不再接受货币定期审查。用户负责验证参考资料和持续适用性或技术要求。新技术可能存在。本规范涵盖了一种辐照、热稳定、改性聚烯烃塑料，其形式为薄壁、热收缩管，回收温度低。这种管子通常被用作非常灵活的电气绝缘管，其直径可以通过加热到100 mDC（212 mDF）或更高而减小到预定尺寸，但使用不限于此类应用。这种管子在-55到+135mDC（-67到+275mDF）的连续暴露下是稳定的。

This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist.This specification covers an irradiated, thermally-stabilized, modified polyolefin plastic in the form of a thin-wall, heat-shrinkable tubing with a low recovery temperature. This tubing has been used typically as a very flexible, electrical insulation tubing whose diameter can be reduced to a predetermined size by heating to 100 \mDC (212 \mDF) or higher, but usage is not limited to such applications. This tubing is stable for continuous exposure from -55 to +135 \mDC (-67 to +275 \mDF).

分类信息

发布单位或类别：美国-美国机动车工程师协会

关联关系

研制信息

相似标准/计划/法规

Plastic Tubing, Electrical Insulation Irradiated Polyolefin, Heat Shrinkable
热收缩辐照聚烯烃电绝缘塑料管

Tubing, Plastic, Electrical Insulation Irradiated Polyolefin, Pigmented, Flexible, Heat-Shrinkable 2 to 1 Shrink Ratio (Stabilized: Jan 2012)
热收缩率为2:1的着色柔性辐照聚烯烃电绝缘塑料管（稳定:2012年1月）

Tubing, Irradiated Polyolefin Plastic, Electrical Insulation Pigmented, Semi-Rigid, Heat Shrinkable, 2 to 1 Shrink Ratio (Stabilized: Jan 2012)
辐照聚烯烃塑料管电气绝缘着色半刚性热收缩收缩比为2:1（稳定:2012年1月）

Plastic Moldings, Electrical Insulation, Crosslinked Polyolefin, Pigmented, Flexible, Heat Shrinkable
塑料模制品电气绝缘交联聚烯烃着色柔性热收缩

Tubing, Irradiated Polyolefin Plastic, Electrical Insulation Clear, Flexible, Heat Shrinkable, 2 to 1 Shrink Ratio (Stabilized: Jan 2012)
辐照聚烯烃塑料管电气绝缘透明挠性热收缩收缩比为2:1（稳定:2012年1月）

Plastic Tubing, Electrical Insulation Irradiated Polyolefin, Clear, Very Flexible, Heat-Shrinkable 2 to 1 Shrink Ratio (Stabilized: Sep 2011)
塑料管电绝缘辐照聚烯烃透明非常灵活热收缩率为2:1（稳定:2011年9月）

Tubing, Irradiated Polyolefin Plastic, Electrical Insulation Clear, Semi-Rigid, Heat Shrinkable, 2 to 1 Shrink Ratio (Stabilized: Jan 2012)
辐照聚烯烃塑料管电气绝缘透明半刚性热收缩收缩比为2:1（稳定:2012年1月）

MIL MIL-K-81786/5A

KIT, TUBING, PLASTIC, IRRADIATED POLYOLEFIN, FLEXIBLE ELECTRICAL INSULATION, HEAT SHRINKABLE, SHRINK RATIO 4 TO 1 (NO S/S DOCUMENT) (SUPERSEDING MIL-K-81786/5)
塑料辐照聚烯烃挠性电绝缘热收缩收缩收缩比4:1套件（无S/S文件）（替代MIL-K-81786/5）

MIL MIL-K-81786/5A Notice 1-Cancellation

KIT, TUBING, PLASTIC, IRRADIATED POLYOLEFIN, FLEXIBLE ELECTRICAL INSULATION, HEAT SHRINKABLE, SHRINK RATIO 4 TO 1 (NO S/S DOCUMENT) (SUPERSEDING MIL-K-81786/5)
套件塑料辐照聚烯烃柔性电绝缘热收缩收缩比4比1（无S/S文件）（取代MIL-K-81786/5）

Tubing, Polyolefin Plastic, Electrical Insulation Selectively Crosslinked, Semi-Rigid, Heat-Shrinkable (Stabilized: Jan 2012)
聚烯烃塑料管选择性交联电绝缘半刚性热收缩（稳定:2012年1月）

MIL MIL-K-81786/3A

KIT TUBING, PLASTIC, HEAT SHRINKABLE (LOW RECOVERY TEMPERATURE), ELECTRICALLY INSULATING, FLEXIBLE, FLAME RETARDED, IRRADIATED POLYOLEFIN; SHRINK RATIO 2 TO 1 (NO S/S DOCUMENT) (SUPERSEDING MIL-K-81786/3)
热收缩（低恢复温度）、电绝缘、柔性、阻燃、辐照聚烯烃塑料套件管；收缩比2:1（无S/S文件）（取代MIL-K-81786/3）

MIL MIL-K-81786/3A Notice 1-Validation

KIT TUBING, PLASTIC, HEAT SHRINKABLE (LOW RECOVERY TEMPERATURE), ELECTRICALLY INSULATING, FLEXIBLE, FLAME RETARDED, IRRADIATED POLYOLEFIN; SHRINK RATIO 2 TO 1 (NO S/S DOCUMENT) (SUPERSEDING MIL-K-81786/3)
成套套管塑料热收缩（低恢复温度）电绝缘柔性阻燃辐照聚烯烃；收缩比2比1（无S/S文件）（取代MIL-K-81786/3）

MIL MIL-K-81786/3A Notice 2-Cancellation

KIT TUBING, PLASTIC, HEAT SHRINKABLE (LOW RECOVERY TEMPERATURE), ELECTRICALLY INSULATING, FLEXIBLE, FLAME RETARDED, IRRADIATED POLYOLEFIN; SHRINK RATIO 2 TO 1 (NO S/S DOCUMENT) (SUPERSEDING MIL-K-81786/3)
成套套管塑料热收缩（低恢复温度）电绝缘柔性阻燃辐照聚烯烃；收缩比2比1（无S/S文件）（取代MIL-K-81786/3）

Tubing, Plastic, Electrical Insulation Irradiated Polyvinylidene Fluoride, Semi-Rigid, Heat-Shrinkable 2 to 1 Shrink Ratio (Stabilized: Nov 2011)
电气绝缘辐照聚偏氟乙烯塑料管半刚性热收缩率为2:1（稳定:2011年11月）

Tubing, Irradiated Modified Fluoropolymer Plastic, Electrical Insulation Flame Resistant, Flexible, Heat-Shrinkable, 2 to 1 Shrink Ratio (Stabilized: Feb 2017)
管道辐照改性氟聚合物塑料电气绝缘阻燃柔性热收缩收缩比为2:1（稳定:2017年2月）

Tubing, Plastic, Electrical Insulation Irradiated Polyvinylidene Fluoride, Semi-Rigid, Heat-Shrinkable Marker Sleeving Grade Low Outgassing (Stabilized: Mar 2017)
电气绝缘辐照聚偏氟乙烯塑料管半刚性热收缩标记套管级低放气（稳定:2017年3月）

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统