本文件给出了通用规范的定义和解释规则 根据ISO 8015（一般公差）适用于整个工件。 一般规范仅适用于积分面，即积分线为 排除。 本文件中定义的一般几何和尺寸规范适用于 以下内容: -尺寸规格: -对于尺寸特征: -线性尺寸（±）（根据ISO 14405-1）； -角度尺寸（±）（根据ISO 14405-3）； -几何规格: -对于整体特征: -具有特征表面轮廓的几何规范（⌓）。

This document gives rules for definition and interpretation of general geometrical specifications and general size specifications defined according to ISO 8015:2011, 5.12. General specifications defined in other standards, and the link to these standards, are not covered by this document. The general geometrical specifications and general size (linear or angular) specifications defined in this document apply only to integral features (including features of size). These specifications do not apply to derived features or integral lines (see ISO 17450-1 for the definitions of integral features and derived features). Dimensions other than linear or angular sizes (see ISO 14405-2) are not covered by this document.