SAE AMS4124F-铝合金、轧制或冷加工棒材、棒材和线材5.6Zn-2.5Mg-1.6Cu-0.23Cr（7075-T73、T7351）固溶热处理、拉伸消除应力和过时效-国家数字标准馆

现行 SAE AMS4124F

到馆提醒

收藏跟踪

购买正版

Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73, T7351) Solution Heat Treated, Stress Relieved by Stretching, and Overaged 铝合金、轧制或冷加工棒材、棒材和线材5.6Zn-2.5Mg-1.6Cu-0.23Cr（7075-T73、T7351）固溶热处理、拉伸消除应力和过时效

发布日期： 2019-02-06

本规范涵盖标称直径或最小标称尺寸不超过6.000英寸（152.40 mm）的轧制或冷加工棒材、棒材和线材形式的铝合金（见8.6）。

This specification covers an aluminum alloy in the form of rolled or cold finished bars, rods, and wire up to 6.000 inches (152.40 mm) in nominal diameter or least nominal dimension (see 8.6).

分类信息

发布单位或类别：美国-美国机动车工程师协会

关联关系

研制信息

相似标准/计划/法规

ASTM B211/B211M-23

Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold Finished Bar, Rod, and Wire
轧制或冷加工的铝及铝合金棒材、棒材和线材的标准规范

SAE AMSQQA225/3A

Aluminum Alloy, Bar, Rod, and Wire, Rolled, Drawn, or Cold Finished, 2011
铝合金、棒材、棒材和线材轧制、拉伸或冷加工 2011年

SAE AMSQQA225/7A

Aluminum Alloy, Bar, Rod, and Wire, Rolled, Drawn, or Cold Finished, 5052
铝合金、棒材、棒材和线材轧制、拉伸或冷加工 5052

Aluminum Alloy, Bars, Rods, and Wire, Rolled Or Cold-Finished 99.0a1, as Fabricated
铝合金、棒材、棒材和线材轧制或冷加工99.0a1 制造时

SAE AMSQQA225/10A

Aluminum Alloy, Bar, Rod, and Wire, Rolled, Drawn, or Cold Finished, 6262
轧制、拉伸或冷加工铝合金棒材、棒材和线材 6262

SAE AMSQQA225/2A

Aluminum Alloy, Bar, Rod, and Wire, Rolled, Drawn, or Cold Finished, 3003
铝合金、棒材、棒材和线材轧制、拉伸或冷加工 3003

Tolerances, Aluminum And Aluminum Alloy Bar, Rod, Wire, And Forging Stock Rolled Or Cold-Finished
轧制或冷加工的铝及铝合金棒材、棒材、线材和锻件的公差

Aluminum Alloy, Bars, Rods, and Wire 4.4cu 1.5mg 0.60mn Rolled, Drawn, Or Cold Finished
铝合金、棒材、棒材和线材4.4cu 1.5mg 0.60mn轧制、拉伸或冷加工

SAE AMSQQA225/8B

Aluminum Alloy 6061, Bar, Rod, Wire, and Special Shapes; Rolled, Drawn, or Cold Finished
6061铝合金、棒材、线材和特殊形状；轧制、拉伸或冷加工

Tolerances, Metric, Aluminum and Aluminum Alloy Bar, Rod, Wire, and Forging Stock, Rolled, Drawn, Or Cold Finished
轧制、拉伸或冷加工的公制铝及铝合金棒材、棒材、线材和锻材公差

SAE AMSQQA225/5A

Aluminum Alloy, 2017, Bar, Rod, and Wire, Rolled, Drawn, or Cold Finished (Stabilized: Nov 2018)
铝合金 2017年棒材、棒材和线材轧制、拉伸或冷加工（稳定化:2018年11月）

SAE AMSQQA225/6B

Aluminum Alloy, 2024, Bar, Rod, and Wire; Rolled, Drawn, or Cold Finished (Stabilized: Mar 2018)
2024铝合金棒材、棒材和线材；轧制、拉伸或冷加工（稳定:2018年3月）

Aluminum Alloy Bars, Rods, and Wire, Rolled or Cold Finished 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-F) As Fabricated, or When Specified, Annealed (7075-O)
铝合金棒材、棒材和线材轧制或冷加工5.6Zn-2.5Mg-1.6Cu-0.23Cr（7075-F）制造或规定时退火（7075-O）

Aluminum Alloy Bars, Rods, and Wire Rolled or Cold Finished, and Rings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6, 7075-T651) Solution and Precipitation Heat Treated
经固溶和沉淀热处理的轧制或冷加工铝合金棒材、棒材和线材以及5.6Zn-2.5Mg-1.6Cu-0.23Cr（7075-T6、7075-T651）环

SAE AMSQQA225/4A

Aluminum Alloy, 2014, Bar, Rod, Wire and Special Shapes, Rolled, Drawn, or Cold Finished (Stabilized: Feb 2017)
铝合金 2014年棒材、棒材、线材和特殊形状轧制、拉伸或冷加工（稳定:2017年2月）

SAE AMSQQA225/9A

Aluminum Alloy 7075, Bar, Rod, Wire, and Special Shapes; Rolled, Drawn, or Cold Finished (Stabilized: Jul 2014)
铝合金7075、棒材、线材和特殊形状；轧制、拉伸或冷加工（稳定化:2014年7月）

Aluminum Alloy Bars and Rods, Rolled or Cold-Finished, 2.5Mg - 0.25Cr (5052-F), As Fabricated
铝合金棒材轧制或冷加工 2.5Mg-0.25Cr（5052-F）制造时

Aluminum and Aluminum Alloy, Bar, Rod, Wire, or Special Shapes; Rolled, Drawn, or Cold Finished; General Specification For (Stabilized: Jan 2018)
铝及铝合金、棒材、棒材、线材或特殊形状；轧制、拉伸或冷加工；通用规范（稳定化:2018年1月）

Aluminum Alloy, Bars and Rods, Rolled Or Cold Finished 4.0cu 0.70mn 0.50mg Stress Relief Stretched
轧制或冷加工铝合金棒材4.0cu 0.70mn 0.50mg应力消除拉伸

Aluminum Alloy, Rolled or Cold Finished Bars and Rods, (7075-T651), Solution and Precipitation Heat Treated
固溶和沉淀热处理的轧制或冷加工棒材和棒材铝合金（7075-T651）

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统