ISO 52017-1:2017规定了一般假设、边界条件和方程式，用于在瞬态小时或分小时条件下，计算内部温度（空气和工作温度）和/或加热、冷却、加湿和除湿负荷，以保持单个建筑区域内的特定（温度、湿度）设定点。ISO 52017-1:2017没有规定具体的数值技术。 ISO 52016-1给出了基于ISO 52017-1:2017通用计算程序的具体计算程序。ISO 52016-1中的具体简化、假设和边界条件适用于各自的应用领域，如加热和冷却以及加湿和除湿的能源需求、每小时内部温度、设计加热和冷却以及加湿和除湿负荷。 注:引言中的表1显示了ISO 52017-1:2017在ISO 52000-1规定的模块化结构背景下在EPB标准集内的相对位置。

ISO 52017-1:2017 specifies the general assumptions, boundary conditions and equations for the calculation, under transient hourly or subhourly conditions, of the internal temperatures (air and operative) and/or the heating, cooling and humidification and dehumidification loads to hold a specific (temperature, moisture) set point, in a single building zone. No specific numerical techniques are imposed by ISO 52017-1:2017. Specific calculation procedures based on the generic calculation procedures of ISO 52017-1:2017 are given in ISO 52016-1. The specific simplifications, assumptions and boundary conditions in ISO 52016-1 are tailored to the respective application areas, such as the energy need for heating and cooling and for humidification and dehumidification, hourly internal temperature, design heating and cooling and humidification and dehumidification load. NOTE Table 1 in the Introduction shows the relative position of ISO 52017-1:2017 within the set of EPB standards in the context of the modular structure as set out in ISO 52000-1.