BS ISO 11413:2019-塑料管道和配件聚乙烯（PE）管和电熔配件之间试件组件的制备-国家数字标准馆

现行 BS ISO 11413:2019

到馆提醒

收藏跟踪

购买正版

Plastics pipes and fittings. Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting 塑料管道和配件聚乙烯（PE）管和电熔配件之间试件组件的制备

发布日期： 2019-03-13

BS ISO 11413:2019规定了用聚乙烯（PE）管或插口端配件和电熔配件（如连接器或鞍座等承插配件）组装的试样制备方法。交叉引用:ISO 4427-2ISO 4437-3ISO 4437-2ISO 12176-2ISO 4427-3ISO 14531-1ISO 15494购买本文件时提供的所有当前修订版均包含在购买本文件中。

BS ISO 11413:2019 specifies a method for the preparation of test pieces assembled from polyethylene (PE) pipes or spigot-ended fittings and electrofusion fittings (e.g. socket fittings such as couplers, or saddles).Cross References:ISO 4427-2ISO 4437-3ISO 4437-2ISO 12176-2ISO 4427-3ISO 14531-1ISO 15494All current amendments available at time of purchase are included with the purchase of this document.

分类信息

发布单位或类别：英国-英国标准学会

关联关系

研制信息

相似标准/计划/法规

Plastics pipes and fittings — Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting
塑料管件和配件 - 聚乙烯（Pe）管和电熔接头之间的试件组件的制备

GB/T 19807-2005

塑料管材和管件聚乙烯管材和电熔管件组合试件的制备
Plastics pipes and fittings Preparation of test piece assemblies between a polyethylene(PE)pipe and an electrofusion fitting

BS ISO 11414-2009

Plastics pipes and fittings. Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion
塑料管道和配件通过对接熔合制备聚乙烯（PE）管/管或管/管件试件组件

Plastics pipes and fittings — Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion
塑料管道和配件——通过对接熔合制备聚乙烯（PE）管/管或管/管件试件组件

GOST R ISO 11414-2014

Трубы и фитинги пластмассовые. Подготовка контрольного образца соединения труба/труба или труба/фитинг из полиэтилена (ПЭ), выполненного сваркой встык
塑料管材及配件通过对接融合制备聚乙烯（PE）管/管或管/配件试件组件

GB/T 19809-2005

塑料管材和管件聚乙烯（PE）管材/管材或管材/管件热熔对接组件的制备
Plastics pipes and fittings-Preparation of polyethylene(PE)pipe/pipe or pipe/fitting test piece assemblies by butt fusion

BS EN ISO 1167-2-2006

Thermoplastics pipes, fittings and assemblies for the conveyance of fluids. Determination of the resistance to internal pressure-Preparation of pipe test pieces
流体输送用热塑性塑料管、配件和组件内压阻力的测定管道试件的制备

KS M ISO 1167-2(2019 Confirm)

유체이송용 열가소성 플라스틱관, 이음관 및 조립품 — 내압저항성의 평가 — 제2부: 관 시험편 제작
用于输送流体的热塑性塑料管道配件和组件 - 耐内压的测定 - 第2部分:管道试件的制备

GOST ISO 1167-2-2013

Трубы, соединительные детали и узлы соединений из термопластов для транспортирования жидких и газообразных сред. Определение стойкости к внутреннему давлению. Часть 2. Подготовка образцов труб
用于运输流体的热塑性塑料管道配件和组件测定内压耐受性第二部分管件试件的制备

ISO 1167-2-2006

Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 2: Preparation of pipe test pieces
流体输送用热塑性塑料管、配件和组件——耐内压性的测定第2部分:管道试件的制备

DIN EN ISO 1167-2

Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 2: Preparation of pipe test pieces (ISO 1167-2:2006)
流体输送用热塑性塑料管、配件和组件.耐内压性的测定.第2部分:管道试样的制备（ISO 1167-2-2006）；德文版EN ISO 1167-2:2006

UNE-EN ISO 1167-2-2006

Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 2: Preparation of pipe test pieces (ISO 1167-2:2006)
流体输送用热塑性塑料管、配件和组件.耐内压性的测定.第2部分:管道试样的制备（ISO 1167-2-2006）

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统