Performance Specification for All Metal Self-Locking Nuts (Unified Threads) strength 160,000 lbf/in² min.tensile (71 tonf/in²) 250°C.max.
全金属自锁螺母（统一螺纹）的性能规范 最小强度160000磅/平方英寸 最大抗拉强度（71吨/平方英寸）250℃

2004-12-01

全金属自锁螺母 第1部分:通用规范
All metal self-locking nuts-Part 1:General specification

2011-07-19

Performance Specification for All Metal Self-Locking Shaft Nuts Unified Threads). Non Corrosion Resistant Steel, rated temperature 235°C.
全金属自锁轴螺母（统一螺纹）的性能规范 非耐腐蚀钢 额定温度235℃

2004-12-01

Performance Specification for All Metal Self-Locking Shaft Nuts (Unified Threads). Non-Corrosion Resistant Steel, rated temperature 350°C.
全金属自锁轴螺母（统一螺纹）性能规范 非耐腐蚀钢 额定温度350°C

2004-12-01

Performance Specification for All Metal Self-Locking Nuts (UNJ Threads) 1100MPa (160,000 lbf/in²) Minimum Tensile Strength at Room Temperature
1100MPa（160000 lbf/in²）室温下最小抗拉强度的全金属自锁螺母（UNJ螺纹）性能规范

2004-12-01

Nuts, Self-Locking, Steel High Strength, All Metal, 450°F Use, Unified "J" (MIL-S-8879) Thread Form
自锁螺母 高强度钢制 全金属 450华氏度 统一“J”（MIL-S-8879）螺纹形式

1990-10-01

Nuts, Self-Locking Steel, Corrosion and Heat Resistant, High Strength, All-Metal, 1200°F Use, Unified (MIL-S-7742) Thread Form
螺母 自锁钢 耐腐蚀和耐热 高强度 全金属 1200华氏度 统一（MIL-S-7742）螺纹形式

1990-10-01

Nuts, Self-Locking Alloy, Corrosion and Heat Resistant, High Strength, All Metal, 1400°F Use, Unified "J" (MIL-S-8879) Thread Form
螺母 自锁合金 耐腐蚀和耐热 高强度 全金属 1400华氏度 统一“J”（MIL-S-8879）螺纹形式

1990-05-01

Technical Specification for All Metal Self-Locking Nuts (UNJ Threads), 1550 Mpa (225,000 lbf/in²) minimum tensile strength at ambient temperature
环境温度下最小抗拉强度为1550 Mpa（225000 lbf/in²）的全金属自锁螺母（UNJ螺纹）技术规范

2004-12-01

Nuts, Self-Locking, Alloy, Corrosion and Heat Resistant, High Strength, All Metal, Solid Film Lubricated, 1400 °F, Procurement Specification
1400华氏度全金属固体薄膜润滑高强度耐腐蚀耐热合金自锁螺母采购规范

2019-04-10

Technical Specification for All Metal Self-Locking Nuts (UNJ Threads) 1210 MPa (175,000 lbf/in²) Minimum Tensile Strength at Ambient Temp.
环境温度下最小抗拉强度为1210 MPa（175000 lbf/in²）的全金属自锁螺母（UNJ螺纹）技术规范

2004-12-01

Technical Specification for All Metal Self-Locking Nuts (UNJ Threads). 1100 Mpa (160,000 lbf/in²) minimum tensile strength at room temperature
全金属自锁螺母（UNJ螺纹）技术规范 1100 Mpa（160000 lbf/in²）室温下的最小抗拉强度

2006-09-01

Technical Specification for All Metal Self-Locking Nuts (MJ Threads) reduced Hexagon, deep counterbored tensile strength:- 1100 Mpa at ambient temperature
全金属自锁螺母（MJ螺纹）缩径六角深沉头螺母技术规范环境温度下抗拉强度:-1100 Mpa

2004-12-01