首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 SAE J1926/2_202303
到馆提醒
收藏跟踪
购买正版
Connections for General Use and Fluid Power Ports and Stud Ends with ASME B1.1 Threads and O-Ring Sealing - Part 2: Heavy-Duty (S Series) Stud Ends 具有ASME B1.1螺纹和O形密封圈的通用和流体动力端口和螺柱端的连接件.第2部分:重型(S系列)螺柱端
发布日期: 2023-03-01
SAE J1926的本部分规定了流体动力和一般应用中使用的带有ASME B1.1螺纹的可调和不可调重型(S系列)螺柱端的尺寸、性能要求和试验程序。 符合SAE J1926本部分要求的螺柱端可用于工作压力高达63 MPa的不可调节螺柱端和高达41.3 MPa的可调螺柱端。允许的工作压力取决于材料、设计、工作条件、应用等。 对于液压流体动力应用的新设计中规定的螺纹端口和螺柱端,只能使用ISO 6149。符合ISO 1179、ISO 9974和ISO 11926的螺纹端口和螺柱端部不得用于液压流体动力应用中的新设计。 尺寸信息的一致性不能保证额定性能。各制造商应根据本文件中包含的规范进行测试,以确保根据本文件制造的部件符合性能等级。 本文件的附录A和附录B仅供参考。
This part of SAE J1926 specifies dimensions, performance requirements, and test procedures for adjustable and nonadjustable heavy-duty (S series) stud ends with ASME B1.1 threads for use in fluid power and general applications. Stud ends in accordance with this part of SAE J1926 may be used at working pressures up to 63 MPa for nonadjustable stud ends and up to 41.3 MPa for adjustable stud ends. The permissible working pressure depends upon materials, design, working conditions, application, etc. For threaded ports and stud ends specified in new designs for hydraulic fluid power applications, only ISO 6149 shall be used. Threaded ports and stud ends in accordance with ISO 1179, ISO 9974, and ISO 11926 shall not be used for new design in hydraulic fluid power applications. Conformance to the dimensional information does not guarantee rated performance. Each manufacturer shall perform testing according to the specification contained in this document to ensure that components made to this document comply with the performance rating. Appendices A and B of this document are informative.
分类信息
关联关系
研制信息
相似标准/计划/法规
现行
GB/T 19674.1-2005
液压管接头用螺纹油口和柱端--螺纹油口
Connections for general use and fluid power Ports and stud ends with thread-Threaded port
2005-02-21
现行
GB/T 14038-2008
气动连接 气口和螺柱端
Pneumatic fluid power - Connections - Ports and stud ends
2008-06-25
现行
ISO 16030-2022
Pneumatic fluid power — Connections — Ports and stud ends
气压传动.连接.端口和螺柱端
2022-07-15
现行
GB/T 19674.3-2005
液压管接头用螺纹油口和柱端 金属对金属密封柱端(B型)
Connections for general use and fluid power-Ports and stud ends with thread-Stud ends with metal-to-metal sealing(type B)
2005-02-21
现行
GB/T 19674.2-2005
液压管接头用螺纹油口和柱端--填料密封柱端(A型和E型)
Connections for general use and fluid power Ports and stud ends with thread-Stud ends with elastomeric sealing(A type and type E)
2005-02-21
现行
BS EN ISO 9974-1-2000
Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing-Threaded ports
一般用途和流体动力的连接 端口和螺柱端部采用ISO 261螺纹 采用弹性体或金属对金属密封
2000-09-15
现行
GB/T 43077.4-2023
液压传动连接 普通螺纹平油口和螺柱端 第4部分:六角螺塞
Connections for hydraulic fluid power—Ports and stud ends with general threads—Part 4: Hex plugs
2023-09-07
现行
BS EN ISO 1179-1-2013
Connections for general use and fluid power. Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing-Threaded ports
一般用途和流体动力的连接 端口和螺柱端部采用ISO 228-1螺纹 采用弹性体或金属对金属密封
2013-11-30
现行
BS EN ISO 9974-2-2000
Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing-Stud ends with elastomeric sealing (type E)
一般用途和流体动力的连接 端口和螺柱端部采用ISO 261螺纹 采用弹性体或金属对金属密封
2000-08-15
现行
ISO 9974-1-1996
Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 1: Threaded ports
通用和流体动力连接件——带ISO 261弹性体或金属对金属密封螺纹的端口和螺柱端第1部分:螺纹端口
1996-04-18
现行
BS EN ISO 9974-3-2000
Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing-Stud ends with metal-to-metal sealing (type B)
一般用途和流体动力的连接 端口和螺柱端部采用ISO 261螺纹 采用弹性体或金属对金属密封
2000-08-15
现行
SAE J1926/3_202305
Connections for General Use and Fluid Power Ports and Stud Ends with ASME B1.1 Threads and O-Ring Sealing Part 3: Light-Duty (L-Series) Stud Ends
带ASME B1.1螺纹和O形密封圈的通用和流体动力端口和螺柱端的连接第3部分:轻型(L系列)螺柱端
2023-05-10
现行
ISO 11926-2-1995
Connections for general use and fluid power — Ports and stud ends with ISO 725 threads and O-ring sealing — Part 2: Heavy-duty (S series) stud ends
通用和流体动力连接件——带ISO 725螺纹和O形密封圈的端口和螺柱端第2部分:重型(S系列)螺柱端
1995-04-20
现行
ISO 11926-3-1995
Connections for general use and fluid power — Ports and stud ends with ISO 725 threads and O-ring sealing — Part 3: Light-duty (L series) stud ends
通用和流体动力连接件——带ISO 725螺纹和O形密封圈的端口和螺柱端第3部分:轻型(L系列)螺柱端
1995-04-20
现行
ISO 1179-1-2013
Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 1: Threaded ports
通用和流体动力连接件——带ISO 228-1弹性体或金属对金属密封螺纹的端口和螺柱端第1部分:螺纹端口
2013-10-22
现行
GB/T 2878.1-2011
液压传动连接 带米制螺纹和O形圈密封的油口和螺柱端 第1部分:油口
Connections for hydraulic fluid power - Ports and stud ends with metric threads and O-ring sealing - Part 1: Ports
2011-12-30
现行
ISO 9974-2-1996
Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 2: Stud ends with elastomeric sealing (type E)
通用和流体动力连接件——ISO 261螺纹弹性体或金属对金属密封端口和螺柱端第2部分:弹性体密封螺柱端(E型)
1996-04-18
现行
DIN ISO 16030
Pneumatic fluid power - Connections - Ports and stud ends (ISO 16030:2001 + Amd. 1:2005)
气压传动.连接.端口和螺柱端(ISO 16030-2001+Amd.1-2005)
2007-05-01
现行
ISO 9974-3-1996
Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 3: Stud ends with metal-to-metal sealing (type B)
通用和流体动力连接件——ISO 261螺纹弹性体或金属对金属密封端口和螺柱端第3部分:金属对金属密封螺柱端(B型)
1996-04-18
现行
ISO 1179-4-2007
Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 4: Stud ends for general use only with metal-to-metal sealing (type B)
通用和流体动力连接件——带ISO 228-1弹性体或金属对金属密封螺纹的端口和螺柱端第4部分:仅用于金属对金属密封的通用螺柱端(B型)
2007-08-13