首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 ASTM F1735-21
到馆提醒
收藏跟踪
购买正版
Standard Specification for Poly (Vinyl Chloride) (PVC) Profile Strip for PVC Liners for Rehabilitation of Existing Man-Entry Sewers and Conduits 聚氯乙烯(PVC)型材PVC标准规范用于修复现有进水下水道和管道的PVC衬板
发布日期: 2021-02-15
1.1 本规范涵盖了用于现场制造现有人员进入(36 in.至144 in.(900 mm至3650 mm)下水道和管道修复用PVC衬里的挤出聚氯乙烯(PVC)型材的材料、尺寸、工艺、挤出质量和标记形式的要求和测试方法。 1.2 根据本规范生产的型材条用于现场制造非压力管道和导管修复中的PVC衬里,其中衬里安装在现有下水道或导管中,并且衬里和现有下水道或导管之间的环形空间用水泥浆灌浆。 注1: 本规范涵盖的PVC衬里安装实践为实践 F1698 . 1.3 本规范包括仅由中规定的材料制成的挤压型材条 6.1 . 1.4 以英寸-磅为单位的数值应视为标准值。括号中给出的值是到国际单位制的数学转换,仅供参考,不被视为标准值。 1.5 本标准并非旨在解决与其使用相关的所有安全问题(如有)。 本标准的用户有责任在使用前制定适当的安全、健康和环境实践,并确定监管限制的适用性。 1.6 本国际标准是根据世界贸易组织技术性贸易壁垒(TBT)委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。
1.1 This specification covers requirements and test methods for materials, dimensions, workmanship, extrusion quality, and a form of marking for extruded poly (vinyl chloride) (PVC) profile strips used for field fabrication of PVC liners for existing man-entry (36 in. to 144 in. (900 mm to 3650 mm) in vertical dimension) sewer and conduit rehabilitation. 1.2 Profile strip produced to this specification is for use in field fabrication of PVC liners in non-pressure pipe and conduit rehabilitation where the liner is installed into the existing sewer or conduit and the annular space between the liner and the existing sewer or conduit is grouted with cementitious grout. Note 1: The practice for the installation of PVC liner covered by this specification is Practice F1698 . 1.3 This specification includes extruded profile strips made only from materials specified in 6.1 . 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
分类信息
关联关系
研制信息
归口单位: F17.67
相似标准/计划/法规
现行
ASTM D3678-19
Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Interior-Profile Extrusions
硬质聚氯乙烯(PVC)内型材挤压件的标准规范
2019-11-01
现行
ASTM D8427-21
Standard Specification for Rigid Poly Vinyl Chloride (PVC) Exterior Profiles Used for Sheet Piling
板桩用硬质聚氯乙烯(PVC)外部型材的标准规范
2021-12-01
现行
ASTM F964-13(2024)
Standard Specification for Rigid Poly (Vinyl Chloride) (PVC) Exterior Profiles Used for Fencing and Railing
围栏和栏杆用硬质聚氯乙烯(PVC)外型材标准规范
2024-09-01
现行
ASTM F3459-21
Standard Specification for Rigid Poly Vinyl Chloride (PVC) Exterior Profiles Used for Sound Walls
隔音墙用硬质聚氯乙烯(PVC)外部型材的标准规范
2021-01-01
现行
ASTM D4216-22
Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Related PVC and Chlorinated Poly(Vinyl Chloride) (CPVC) Building Products Compounds
硬质聚氯乙烯(PVC)及相关PVC和氯化聚氯乙烯(CPVC)建筑产品化合物的标准规范
2022-05-01
现行
ASTM D3679-24
Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding
硬质聚氯乙烯(PVC)壁板的标准规范
2024-04-01
现行
ASTM F1697-24
Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduit
现有下水道和导管的机器螺旋缠绕衬管修复用聚氯乙烯(PVC)型材带的标准规范
2024-04-01
现行
ASTM D4477-24
Standard Specification for Rigid (Unplasticized) Poly(Vinyl Chloride) (PVC) Soffit
硬质(未增塑)聚氯乙烯(PVC)拱腹的标准规范
2024-04-01
现行
ASTM F1336-20
Standard Specification for Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings
聚氯乙烯(PVC)垫片下水道管件标准规范
2020-11-01
现行
ASTM D2729-21
Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
聚氯乙烯(PVC)污水管和配件的标准规范
2021-11-01
现行
ASTM D4726-24
Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Exterior-Profile Extrusions Used for Assembled Windows and Doors
组装门窗用硬质聚氯乙烯(PVC)外型材挤压件的标准规范
2024-02-01
现行
ASTM D6263-23
Standard Specification for Extruded Rods and Bars Made From Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC)
硬质聚氯乙烯(PVC)和氯化聚氯乙烯(CPVC)制成的挤压棒材和棒材的标准规范
2023-02-01
现行
ASTM D1784-20
Standard Classification System and Basis for Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
硬质聚氯乙烯(PVC)化合物和氯化聚氯乙烯(CPVC)化合物的标准分类系统和基本规范
2020-01-15
现行
AASHTO M 304-11(2019)
Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Wall Drain Pipe and Fittings Based on Controlled Inside Diameter
基于受控内径的聚氯乙烯(PVC)异型壁排水管和配件的标准规范
现行
ASTM F794-21
Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter
聚合物标准规格
2021-04-01
现行
AASHTO M 304-11(2023)
Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Wall Drain Pipe and Fittings Based on Controlled Inside Diameter
基于受控内径的聚氯乙烯(PVC)异型壁排水管和配件的标准规范
现行
ASTM F1970-23
Standard Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems
聚氯乙烯(PVC)或氯化聚氯乙烯(CPVC)系统中使用的特殊工程配件、附件或阀门的标准规范
2023-02-15
现行
ASTM F1698-21
Standard Practice for Installation of Poly(Vinyl Chloride)(PVC) Profile Strip Liner and Cementitious Grout for Rehabilitation of Existing Man-Entry Sewers and Conduits
用于安装聚氯乙烯(PVC)型材带衬套和水泥浆的标准实践 用于现有人工下水道和管道的修复
2021-07-01
现行
ASTM F1732-24
Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer and Drain Pipe Containing Recycled PVC Material
含有再生聚氯乙烯材料的聚氯乙烯下水道和排水管的标准规范
2024-04-01
现行
ASTM D2241-24
Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)
聚氯乙烯压力额定管(SDR系列)标准规范
2024-04-01