BS PD ISO/TS 21219-22:2017规定了OpenLR的逻辑数据格式™ 位置参考和概述 第6条中的方法要求，并定义了OpenLR的TPEG工具包的结构 第7、8和9条中的位置参考（OLR）。该工具包拟用于TPEG位置 参考容器（TPEG-LRC）。OpenLR™ 设计用于将交通信息从中心传输到invehicle的用例 内置或用作附加组件的系统（PND、智能手机）。传输的信息可以 由特定位置的当前交通状况、交通预测或特别警报组成。 这个 相应的位置是道路、连接的道路列表、兴趣点或区域。为了将位置信息从发送端传输到接收端，OpenLR&tradem；方法 定义用于生成与地图无关的位置参照（即实际位置参照）的规则 是动态生成的，无需使用预定义的位置引用。交叉引用:ISO/TS 21219-1:2016 ISO/TS 21219-2:2014ISO/TS 24530-3:2006 Ed 1ISO/TS 18234-2:2013 ED2ISO/TS 18234-3:2013 ED2ISO/TS 21219-4:2015ISO/TS 18234-1:2013 ED2ISO/TS 21219- 7:2017ISO/TS 18234-5:2006 Ed 1ISO/TS 21219-5:2015ISO/TS 18234-6:2006 Ed 1ISO/TS 21219-3:2015ISO/TS 18234-4:2006 Ed 1CEN ISO/TS 24530-3（ISO/TS 24530-3:2006）ISO/TS 24530-2:2006 Ed 1ISO/TS 24530-1:2006 Ed 1购买本文件时提供的所有当前修订版均包含在购买本文件中。

BS PD ISO/TS 21219-22:2017 specifies the logical data format of OpenLR™ location references and general requirements of the method in Clause 6 and defines the structure of the TPEG toolkit for OpenLR location referencing (OLR) in Clauses 7, 8 and 9. The toolkit is intended to be used in the TPEG location referencing container (TPEG-LRC).OpenLR™ has been designed for the use case of transferring traffic information from a centre to invehicle systems, built-in or used as an add-on (PND, smart phone). The information transferred can consist of the current traffic situation at a certain location, a traffic forecast or special alerts. The corresponding locations are roads, a list of connected roads, points of interest, or areas.In order to transmit location information from a sending to a receiving side, the OpenLR&tradem; method defines rules for generating map-independent location references, that is, the actual location references are generated dynamically not requiring use of pre-defined location references.Cross References:ISO/TS 21219-1:2016 ISO/TS 21219-2:2014ISO/TS 24530-3:2006 Ed 1ISO/TS 18234-2:2013 ED2ISO/TS 18234-3:2013 ED2ISO/TS 21219-4:2015ISO/TS 18234-1:2013 ED2ISO/TS 21219-7:2017ISO/TS 18234-5:2006 Ed 1ISO/TS 21219-5:2015ISO/TS 18234-6:2006 Ed 1ISO/TS 21219-3:2015ISO/TS 18234-4:2006 Ed 1CEN ISO/TS 24530-3(ISO/TS 24530-3:2006)ISO/TS 24530-2:2006 Ed 1ISO/TS 24530-1:2006 Ed 1All current amendments available at time of purchase are included with the purchase of this document.