COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS. TEST ON GASES EVOLVED DURING COMBUSTION OF MATERIALS FROM CABLES. PART 1: APPARATUS.
火灾条件下电缆的通用试验方法 测试电缆材料燃烧过程中产生的气体 第1部分:仪器

1999-05-21

COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS. TEST ON GASES EVOLVED DURING COMBUSTION OF MATERIAL FROM CABLES. PART 2-2: PROCEDURES. DETERMINATION OF DEGREE OF ACIDITY OF GASES FOR MATERIALS BY MEASURING PH AND CONDUCTIVITY.
火灾条件下电缆的通用试验方法 测试电缆材料燃烧过程中产生的气体 第2-2部分:程序 通过测量PH值和电导率来测定材料气体的酸度

1999-05-21

COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS. TEST ON GASES EVOLVED DURING COMBUSTION OF MATERIAL FROM CABLES. PART 2: PROCEDURES. SECTION 3: DETERMINATION OF DEGREE OF ACIDITY OF GASES FOR CABLES BY DETERMINATION OF THE WEIGHTED AVERAGE OF PH AND CONDUCTIVITY.
火灾条件下电缆的通用试验方法 测试电缆材料燃烧过程中产生的气体 第2部分:程序 第3节:通过测定PH值和电导率的加权平均值来测定电缆用气体的酸度

1999-05-21

Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables -- Part 1: Apparatus.
着火条件下电缆的通用试验方法.垂直安装的成束电线或电缆的垂直火焰蔓延试验.第1部分:仪器

2001-07-20

Communication cables. Specifications for test methods-Environmental test methods. Circuit integrity under fire conditions
通讯电缆 试验方法规范

2016-09-30

Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables -- Part 2-2: Procedures - Category A.
着火条件下电缆的通用试验方法.垂直安装的成束电线或电缆的垂直火焰蔓延试验.第2-2部分:程序.A类

2001-07-20

Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables -- Part 2-4: Procedures - Category C.
着火条件下电缆的通用试验方法.垂直安装的成束电线或电缆的垂直火焰蔓延试验.第2-4部分:程序.C类

2001-07-20

Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables -- Part 2-3: Procedures - Category B.
着火条件下电缆的通用试验方法.垂直安装的成束电线或电缆的垂直火焰蔓延试验.第2-3部分:程序.B类

2001-07-20

Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables -- Part 2-5 Procedures - Small cables - Category D.
着火条件下电缆的通用试验方法.垂直安装的成束电线或电缆的垂直火焰蔓延试验.第2-5部分程序.小型电缆.D类

2001-07-20

EN 50399-1. Common test methods for cables under fire conditions. Heat release and smoke production measurement on cables during flame spread test. Part 1: Apparatus
EN 50399-1 火灾条件下电缆的通用试验方法 火焰蔓延试验期间电缆的热释放和烟雾产生测量 第1部分:仪器

2003-06-05

Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables -- Part 2-1: Procedures - Category A F/R.
着火条件下电缆的通用试验方法.垂直安装的成束电线或电缆的垂直火焰蔓延试验.第2-1部分:程序.A类F/R

2001-07-20

单根电线电缆燃烧试验方法 第2部分：水平燃烧试验
Test method on a single wire or cable under fire conditions - Part 2: Horizontal specimen flame test

2008-06-30

单根电线电缆燃烧试验方法 第1部分：垂直燃烧试验
Test method on a single wire or cable under fire conditions - Part 1: Vertical specimen flame test

2008-06-30

单根电线电缆燃烧试验方法 第3部分：倾斜燃烧试验
Test method on a single wire or cable under fire conditions - Part 3: Slanting specimen flame test

2008-06-30

电缆或光缆在受火条件下的火焰传播及热释放和产烟特性的试验方法
Test methods for electrical or optical cables under fire conditions—Flame spread,heat release and smoke production measurement during test

2007-10-17

电缆或光缆在受火条件下火焰蔓延、热释放和产烟特性的试验方法
Test methods for the measurement of flame spread, heat release and smoke production on electric or optical fibre cables under fire conditions

2014-12-05

Tests for electric cables under fire conditions - Circuit integrity, Method 3: Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage up to and including 0.6/1.0 kV tested in a metal enclosure
着火条件下电缆的试验.电路完整性 方法3:在金属外壳中试验的额定电压小于等于0.6/1.0 kV的电缆在至少830°C温度下的冲击着火试验方法

2021-02-12

화재 조건에서 전기 케이블 시험 — 회로 완전성 — 제3부: 최소 830 ℃ 온도에서 금속 외함에서 시험한 정격 전압 0.6/1.0 kV 이하 케이블에 대한 화재 시험방법
着火条件下电缆的试验.电路完整性.第3部分:在金属外壳中试验的额定电压0.6/1.0kV及以下的电缆在至少830℃温度下的冲击着火的试验方法

2014-10-03

在火焰条件下电缆或光缆的线路完整性试验 第3部分：火焰温度不低于830 ℃的供火并施加冲击振动，额定电压0.6/1 kV及以下电缆穿在金属管中进行的试验方法
Circuit integrity test for electric cables or optical fiber cables under fire conditions—Part 3: Test method for fire with shock at a temperature of at least 830 ℃ for cables of rated voltage up to and including 0.6/1 kV tested in a metal enclosure

2021-05-21

Tests for electric cables under fire conditions - Circuit integrity, Part 3: Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage up to and including 0,6/1,0 kV tested in a metal enclosure
着火条件下电缆的试验.电路完整性 第3部分:在金属外壳中试验的额定电压0.6/1.0 kV及以下电缆在至少830°C温度下冲击着火的试验方法

2017-05-01