1.1 本实践包括将喷雾抛光产品在测试地板上的性能与参考材料进行比较。喷雾抛光产品用于维护底层地板抛光膜。该技术旨在用于水乳液地板抛光，地板机器的重量不超过95磅（43公斤），转速不超过350转/分。 1.2 将喷雾抛光测试板的光泽度、跟痕、耐污性和防滑性与用参考喷雾抛光产品进行类似维护的测试板进行比较。 1.3 以英寸-磅单位表示的值应被视为标准值。括号中给出的值是对SI单位的数学转换，仅供参考，不被视为标准。 1.4 本标准并不旨在解决与其使用相关的所有安全性问题（如果有）。本标准的使用者有责任在使用前建立适当的安全、健康和环境实践并确定法规限制的适用性。 1.5 本国际标准是根据世界贸易组织技术性贸易壁垒委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认的标准化原则制定的。 ======意义和用途====== 4.1 喷雾抛光产品用于维护抛光地板。本实践用于对照参考产品评估喷雾抛光产品。该程序是利用转盘地板机进行的地板测试。目前编写的该实践可能适用于也可能不适用于转速超过350 rpm的机器。

1.1 This practice covers the comparison of the performance of spray-buff products on test floors against a reference material. Spray-buff products are to be used to maintain base floor-polish films. This technique is intended to be used on water-emulsion floor polishes with a floor machine not exceeding 95 lb (43 kg) in weight and with a rate of rotation of 350 rpm or less. 1.2 Gloss, heel marking, soil resistance, and slip resistance of the spray-buffed test panels are rated in comparison to test panels similarly maintained with a reference spray-buff product. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 4.1 Spray-buff products are utilized for the maintenance of polished floors. This practice is for the evaluation of a spray-buff product against a reference product. The procedure is a floor test utilizing a rotary-disc floor machine. This practice as currently written may or may not be applicable for machines in excess of 350 rpm.