本文件给出了适当设计的一般原则的指南和建议 制造后（例如，根据ISO 1461）进行热浸镀锌以防腐蚀的物品 保护，例如，根据EN 1090-2制造的物品。 本文件不适用于连续钢丝或板材上的热浸镀锌涂层（例如 EN 10346）。交叉引用:ISO 8044EN 10025-4EN 1561ISO 10684EN 1993-1-10EN 15773EN 10080EN 10210-1ISO 898（所有部分）ISO 12944-5EN 10348-2EN 10346EN 10025-2EN 10219-1EN 13438EN 10240EN 10025-3EN 1562EN 1090-2:2018ISO 1461:2009购买本文件时可提供的所有当前修订。

This document gives guidelines and recommendations for the general principles of design appropriate to articles to be hot dip galvanized after fabrication (e.g. in accordance with ISO 1461) for the corrosion protection of, for example, articles that have been manufactured in accordance with EN 1090-2. This document does not apply to hot dip galvanized coatings applied to continuous wire or sheet (e.g. to EN 10346).Cross References:ISO 8044EN 10025-4EN 1561ISO 10684EN 1993-1-10EN 15773EN 10080EN 10210-1ISO 898 (all parts)ISO 12944-5EN 10348-2EN 10346EN 10025-2EN 10219-1EN 13438EN 10240EN 10025-3EN 1562EN 1090-2:2018ISO 1461:2009All current amendments available at time of purchase are included with the purchase of this document.