SAE AMS4313F-铝合金轧制或锻造环6.3Cu-0.30Mn-0.18Zr-0.10V-0.06Ti（2219-T351、2219-T352）固溶热处理和机械应力消除（2022年11月稳定）-国家数字标准馆

现行 SAE AMS4313F

到馆提醒

收藏跟踪

购买正版

Aluminum Alloy, Rolled or Forged Rings 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T351, 2219-T352) Solution Heat Treated and Mechanically Stress Relieved (Stabilized: Nov 2022) 铝合金轧制或锻造环6.3Cu-0.30Mn-0.18Zr-0.10V-0.06Ti（2219-T351、2219-T352）固溶热处理和机械应力消除（2022年11月稳定）

发布日期： 2022-11-14

本规范涵盖6英寸（152 mm）以下的铝合金轧制或锻造环，这些环在-T351或-T352回火状态下生产和运输，并在投入使用前人工时效至-T82回火状态。

This specification covers aluminum alloy rolled or forged rings up to 6 inches (152 mm) which are produced and shipped in the -T351 or -T352 temper and are artificially aged to the -T82 temper prior to being put into service.

分类信息

发布单位或类别：美国-美国机动车工程师协会

关联关系

研制信息

相似标准/计划/法规

Aluminum Alloy Forgings and Rolled or Forged Rings 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T6) Solution and Precipitation Heat Treated
铝合金锻件和轧制或锻造环6.3Cu-0.30Mn-0.18Zr-0.10V-0.06Ti（2219-T6）固溶和沉淀热处理

Aluminum Alloy, Welding Wire 6.3Cu - 0.30Mn - 0.18Zr - 0.15Ti - 0.10V (2319)
铝合金焊丝6.3Cu-0.30Mn-0.18Zr-0.15Ti-0.10V（2319）

Aluminum Alloy, Hand Forgings and Rolled Rings 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T852/T851) Solution Heat Treated, Mechanically Stress Relieved, and Precipitation Heat Treated
铝合金、手工锻件和轧制环6.3Cu-0.30Mn-0.18Zr-0.10V-0.06Ti（2219-T852/T851）固溶热处理、机械应力消除和沉淀热处理

Aluminum Alloy Sheet and Plate, Alclad 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (Alclad 2219-O) Annealed
铝合金薄板和板材 Alclad 6.3Cu-0.30Mn-0.18Zr-0.10V-0.06Ti（Alclad 2219-O）退火

Aluminum Alloy, Sheet, and Plate 6.3Cu - 0.30Mn - 0.06Ti - 0.10V - 0.18Zr Solution and Precipitation Heat Treated (2219 -T81/-T851)
铝合金、薄板和板材6.3Cu-0.30Mn-0.06Ti-0.10V-0.18Zr固溶和沉淀热处理（2219-T81/-T851）

Aluminum Alloy, Sheet and Plate 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-O) Annealed or, When Specified, “As Fabricated” (2219-F)
铝合金薄板和板材6.3Cu-0.30Mn-0.18Zr-0.10V-0.06Ti（2219-O）退火或规定时“制造”（2219-F）

Aluminum Alloy, Extrusions 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T3511) Solution Heat Treated, Stress-Relieved by Stretching, and Straightened
铝合金挤压件6.3Cu-0.30Mn-0.18Zr-0.10V-0.06Ti（2219-T3511）固溶热处理拉伸消除应力并矫直

Aluminum Alloy, Drawn Seamless Tubing 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T3511) Solution Heat Treated and Stress Relieved by Stretching
铝合金拉制无缝管6.3Cu-0.30Mn-0.18Zr-0.10V-0.06Ti（2219-T3511）固溶热处理和拉伸消除应力

Aluminum Alloy, Sheet and Plate 6.3Cu - 0.30Mn - 0.06Ti - 0.10V - 0.18Zr Solution Heat Treated, Cold Worked and Naturally Aged (2219 -T31/-T351)
铝合金薄板6.3Cu-0.30Mn-0.06Ti-0.10V-0.18Zr固溶热处理、冷加工和自然时效（2219-T31/-T351）

Aluminum Alloy, Sheet and Plate, 6.3Cu - 0.30Mn - 0.06Ti - 0.10V - 0.18Zr, Solution Heat Treated, Cold Worked (8%) and Naturally Aged (2219 -T37)
6.3Cu-0.30Mn-0.06Ti-0.10V-0.18Zr、固溶热处理、冷加工（8%）和自然时效的铝合金薄板和板材（2219-T37）

Aluminum Alloy, Extrusions 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T8511) Solution Treated, Stress Relief Stretched, Straightened, and Precipitation Heat Treated
铝合金挤压件6.3Cu-0.30Mn-0.18Zr-0.10V-0.06Ti（2219-T8511）固溶处理应力消除拉伸、矫直和沉淀热处理

Aluminum Alloy, Sheet and Plate, 6.3Cu - 0.30Mn - 0.06Ti - 0.10V - 0.18Zr, Solution Heat Treated, Cold Worked (8%) and Precipitation Heat Treated (2219 -T87)
铝合金板材 6.3Cu-0.30Mn-0.06Ti-0.110V-0.18Zr 固溶热处理冷加工（8%）和沉淀热处理（2219-T87）

Aluminum Alloy, Sheet and Plate 6.3Cu - 0.30Mn - 0.06Ti - 0.10V - 0.18Zr (2219 - O, F, T31, T351, T37, T81, T851, T87) (Stabilized: Sep 2013)
铝合金薄板和板材6.3Cu-0.30Mn-0.06Ti-0.10V-0.18Zr（2219-O F T31 T351 T37 T81 T851 T87）（稳定化:2013年9月）

Aluminum Alloy, Drawn, Round Seamless Tubing 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti - (2219-T8511) Solution Heat Treated, Stress Relieved by Stretching and Precipitation Heat Treated
铝合金拉制圆形无缝管6.3Cu-0.30Mn-0.18Zr-0.10V-0.06Ti-（2219-T8511）固溶热处理通过拉伸和沉淀热处理消除应力

Aluminum Alloy, Alclad Sheet and Plate 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti Alclad 2219-T31; Sheet, Solution Heat Treated and Cold Worked Alclad 2219-T351; Plate, Solution Heat Treated and Stress Relieved
铝合金包铝薄板和板材6.3Cu-0.30Mn-0.18Zr-0.10V-0.06Ti包铝2219-T31；薄板固溶热处理和冷加工Alclad 2219-T351；板固溶热处理和应力消除

Aluminum Alloy, Sheet and Plate, Alclad 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti Alclad 2219-T81 Sheet Solution Heat Treated, Cold Worked, and Precipitation Heat Treated Alclad 2219-T851 Plate Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated
铝合金板材和板材 Alclad 6.3Cu-0.30Mn-0.18Zr-0.10V-0.06Ti Alclad 2219-T81板材固溶热处理、冷加工和沉淀热处理Alclad 221 9-T851板材固溶、应力消除和沉淀热热处理

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统