BS ISO 13400-3:2016规定了车辆的通信接口和测试设备要求 基于IEEE 802.3 100BASE-TX的物理和数据链路层。该接口作为车辆和测试设备之间基于IP的通信的物理基础 设备本文件规定了以下方面:信号和接线示意图的要求，以确保设备的物理层兼容性 车辆接口、以太网和测试设备通信接口；发现/识别车内诊断以太网接口；激活和停用车内诊断以太网接口； 机械和电气诊断连接器要求；此版本已修改为包含两个以太网管脚分配的标识。交叉引用:IEC 60950-1IEEE 802.3-2015ISO 13400-1ISO 13400-2ISO 13400-4ISO 14229-1ISO 14229-2ISO 14229-5ISO 27145-2ISO 27145-3ISO/IEC 7498-1ISO/IEC 10731SAE J1930-DASAE J1939DASAE J1939-73:2010SAE J1962SAE J1979-DASAE J2012-DATIA/EIA-568-购买本文件时可用的球电流修正案包括在内。

BS ISO 13400-3:2016 specifies the vehicle communication interface and test equipment requirements for a physical and data link layer based on IEEE 802.3 100BASE-TX.This interface serves as the physical basis for IP-based communication between the vehicle and test equipment. This document specifies the following aspects:requirements for signal and wiring schematics in order to ensure physical layer compatibility of the vehicle interface and Ethernet networks and test equipment communication interfaces;discovery/identification of the in-vehicle diagnostic Ethernet interface;activation and deactivation of the in-vehicle diagnostic Ethernet interface;mechanical and electrical diagnostic connector requirements;this edition has been modified to include the identification of two Ethernet pin assignments.Cross References:IEC 60950-1IEEE 802.3-2015ISO 13400-1ISO 13400-2ISO 13400-4ISO 14229-1ISO 14229-2ISO 14229-5ISO 27145-2ISO 27145-3ISO/IEC 7498-1ISO/IEC 10731SAE J1930-DASAE J1939DASAE J1939-73:2010SAE J1962SAE J1979-DASAE J2012-DATIA/EIA-568-BAll current amendments available at time of purchase are included with the purchase of this document.