BS IEC 63171-2:2021-电气和电子设备用连接器-国家数字标准馆

现行 BS IEC 63171-2:2021

到馆提醒

收藏跟踪

购买正版

Connectors for electrical and electronic equipment-Detail specification for 2-way, shielded or unshielded, free and fixed connectors: mechanical mating information, pin assignment and additional requirements for type 2 电气和电子设备用连接器

发布日期： 2021-09-23

IEC 63171的这一部分涵盖了2路、屏蔽或非屏蔽、自由和固定连接器，用于传输高达600 MHz的数据，其载流能力称为2型。它分别规定了通用尺寸、机械、电气和传输特性、环境要求以及试验规范。购买本文件时可获得的所有当前修订均包含在购买本文件中。

This part of IEC 63171 covers 2-way, shielded or unshielded, free and fixed connectors for data transmission up to 600 MHz, with current-carrying capacity, known as Type 2. It specifies the common dimensions, mechanical, electrical and transmission characteristics and environmental requirements as well as test specifications respectively.All current amendments available at time of purchase are included with the purchase of this document.

分类信息

发布单位或类别：英国-英国标准学会

关联关系

研制信息

相似标准/计划/法规

BS EN 61076-2-001-2011

Connectors for electronic equipment. Product requirements-Circular connectors. Blank detail specification
电子设备用连接器产品要求

BS EN 61076-3-001-2008

Connectors for electronic equipment. Product requirements-Rectangular connectors. Blank detail specification
电子设备用连接器产品要求

BS IEC 60512-1-101-2015

Connectors for electronic equipment. Tests and measurements-Blank detail specification
电子设备用连接器测试和测量

BS EN 61076-2-103-2004

Connectors for electronic equipment-Circular connectors-Detail specification for a range of multipole connectors (type 'XLR')
电子设备用连接器

BS EN IEC 60603-7-2020

Connectors for electronic equipment-Detail specification for 8-way, unshielded, free and fixed connectors
电子设备用连接器

BS EN 60603-7-2009+A1-2011

Connectors for electronic equipment-Detail specification for 8-way, unshielded, free and fixed connectors
电子设备用连接器

BS EN 60603-7-1-2011

Connectors for electronic equipment-Detail specification for 8-way, shielded, free and fixed connectors
电子设备用连接器

BS EN 61076-7-001-2004

Connectors for electronic equipment-Cable outlet accessories-Blank detail specification
电子设备用连接器

BS EN 61076-2-101-2012

Connectors for electronic equipment. Product requirements-Circular connectors. Detail specification for M12 connectors with screw-locking
电子设备用连接器产品要求

BS EN 61076-2-105-2008

Connectors for electronic equipment. Product requirements-Circular connectors. Detail specification for M5 connectors with screw-locking
电子设备用连接器产品要求

IEC 61076-2-111-2017

Connectors for electrical and electronic equipment - Product requirements - Part 2-111: Circular connectors - Detail specification for power connectors with M12 screw-locking
电气和电子设备用连接器.产品要求.第2-111部分:圆形连接器.带M12螺钉锁紧的电源连接器详细规范

BS EN 61076-2-107-2010

Connectors for electronic equipment. Product requirements-Detail specification for circular hybrid connectors M12 with electrical and fibre-optic contacts with screw locking
电子设备用连接器产品要求

BS PD IEC/PAS 61076-3-126-2018

Connectors for electrical and electronic equipment. Product requirements-Rectangular connectors - Detail specification for 5 pole power connector for industrial environments with push-pull locking
电气和电子设备用连接器产品要求矩形连接器.带推拉锁定的工业环境用5极电源连接器详细规范

IEC 60603-7-2020 RLV

Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors
电子设备连接器第7部分:8路非屏蔽自由和固定连接器详细规范

IEC 61076-2-001-2011

Connectors for electronic equipment - Product requirements - Part 2-001: Circular connectors - Blank detail specification
电子设备连接器 - 第2-001部分:圆形连接器 - 空白详细规格

IEC 61076-3-001-2008

Connectors for electronic equipment - Product requirements - Part 3-001: Rectangular connectors - Blank detail specification
电子设备用连接器产品要求第3-001部分:矩形连接器空白详细规范

IEC 60603-7-2020

Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors
电子设备连接器 - 第7部分:8路非屏蔽空闲和固定连接器的详细规范

IEC 61076-2-103-2004

Connectors for electronic equipment - Part 2-103: Circular connectors - Detail specification for a range of multipole connectors (type 'XLR')
电子设备连接器第2-103部分:圆形连接器 - 一系列多极连接器的详细规格（“xlr”型）

IEC 60512-1-101-2015

Connectors for electronic equipment - Tests and measurements - Part 1-101: Blank detail specification
电子设备用连接器.试验和测量.第1-101部分:空白详细规范

INTERIM DETAIL SPECIFICATION FOR 2.5 MM TWO PART CONNECTOR FOR USEIN ELECTRONIC EQUIPMENT
电子设备用2.5mm两件式连接器暂行详细规范

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统