BS ISO 18069:2015规定了均匀腐蚀的腐蚀速率测量 适用于预期液体中的不锈钢和镍基合金，以及材料 激活后钝化。该方法旨在用于估算液体中的均匀腐蚀速率，在 大气条件，用于特定环境条件下的化学工业，而不是作为 资格考试。它还可用于确定iso腐蚀图和腐蚀温度 腐蚀速率超过0.1 mm/a。本国际标准不适用于超过1 mm/a的过度腐蚀速率，因为 较高的腐蚀速率表明不锈钢不适合应用。本国际标准不适用于含有卤化物的溶液，尤其是 氯化物，因为这些可能会导致局部腐蚀。交叉引用:ISO 3696ISO 8044ISO 17864ISO 6344-3购买本文件时可获得的所有现行修订均包含在购买本文件中。

BS ISO 18069:2015 specifies the measurements of the corrosion rate of uniform corrosion for stainless steels and nickel based alloys in the intended liquids and the ability for the material to passivate after activation.This method is intended to be used for estimation of the uniform corrosion rate in liquids, under atmospheric conditions, for the chemical industry under specific environmental conditions and not as a qualification test. It can also be used to determine iso-corrosion diagrams and at which temperature the corrosion rate exceeds 0,1 mm/a.This International Standard is not intended for excessive corrosion rates above 1 mm/a since an even higher corrosion rate indicates that the stainless steel is not suitable in the application.This International Standard is not intended to be used for solutions containing halides, especially chlorides, since these might cause localized corrosion.Cross References:ISO 3696ISO 8044ISO 17864ISO 6344-3All current amendments available at time of purchase are included with the purchase of this document.