IEC 60754-1:20 11规定了测定基于卤化聚合物的化合物和取自电缆或光纤电缆结构的含有卤化添加剂的化合物燃烧过程中产生的卤化酸性气体（氢氟酸除外）的量的设备和程序。 本标准中规定的方法旨在测试电缆结构中使用的单个部件。该方法的使用将能够验证在适当的电缆规范中针对电缆结构的各个部件所规定的要求。与上一版相比的重大技术变更如下: -改进与气体捕获和试剂使用有关的安全要求的定义； -引入关于制备更均匀燃烧的试样的指南；-对建立加热状态的程序的改进； -改进公差和精度的表达； -空白测试程序的定义； -引入一个资料性附件，详细介绍了用于测定代表电缆结构的样品的卤素酸性气体含量的方法。 根据IEC指南104，IEC 60754-1:20 11具有团体安全出版物的状态。 2013年11月更正的内容已纳入本副本。

IEC 60754-1:2011 specifies the apparatus and procedure for the determination of the amount of halogen acid gas, other than hydrofluoric acid, evolved during the combustion of compounds based on halogenated polymers and compounds containing halogenated additives taken from electric or optical fibre cable constructions. The method specified in this standard is intended for the testing of individual components used in a cable construction. The use of this method will enable the verification of requirements which are stated in the appropriate cable specification for individual components of a cable construction. The significant technical changes with respect to the previous edition are as follows:
- improved definition of safety requirements relating to capture of gases and use of reagents;
- introduction of guidance on preparation of test specimens for a more even combustion;
- improvements to the procedure for establishing the heating regime;
- improved expression of tolerances and precision;
- definition of the procedure for the blank test;
- introduction of an informative annex giving details of a methodology for the determination of the halogen acid gas content of a sample representative of a cable construction.
IEC 60754-1:2011 Has the status of a group safety publication in accordance with IEC Guide 104. The contents of the corrigendum of November 2013 have been included in this copy.