AS/NZS 4024:2019系列《机械安全标准》包含26个欧洲（EN）和国际（ISO）安全和设计标准的部分，并进行了一些修改，以满足澳大利亚严格的安全实践和法规。该系列为机械设计师、制造商、供应商、雇主和用户提供指导，帮助降低使用或接近机械的风险。

AS/NZS 4024:2019 Series, Safety of machinery standards, contains 26 Parts that are European (EN) and Internationally-based (ISO) safety and design Standards with some modifications to meet Australia's tough safety practices and regulations. The series provides designers, manufacturers, suppliers, employers and users of machinery with guidelines to help reduce the risks of working with, or near, machinery.ContentsAS 4024.1100:2019, Safety of machinery, Part 1100: Application guideAS/NZS 4024.1201:2014, Safety of machinery, Part 1201: General principles for design - Risk assessment and risk reductionAS/NZS 4024.1204:2019, Safety of machinery, Part 1204: Electrical equipment of machines - General requirements (IEC 60204-1:2016 (ED. 6.0) MOD)AS/NZS 4024.1302:2019, Safety of machinery, Part 1302: Risk assessment - Reduction of risks to health from hazardous substances emitted by machinery - Principles and specifications for machinery manufacturersAS/NZS 4024.1303:2014, Safety of machinery, Part 1303: Risk assessment - Practical guidance and examples of methodsAS/NZS 4024.1401:2014, Safety of machinery, Part 1401: Ergonomic principles - Design principles - Terminology and general principlesAS 4024.1501-2006, Safety of machinery, Part 1501: Design of safety related parts of control systems - General principles for design (Reconfirmed, 2014)AS 4024.1502-2006, Safety of machinery, Part 1502: Design of safety related parts of control systems - Validation (Reconfirmed 2014)AS/NZS 4024.1503:2014, Safety of machinery, Part 1503: Safety-related parts of control systems - General principles for designAS/NZS 4024.1601:2014, Safety of machinery, Part 1601: Design of controls, interlocks and guarding - Guards - General requirements for the design and construction of fixed and movable guardsAS/NZS 4024.1602:2014, Safety of machinery, Part 1602: Interlocking devices associated with guards - Principles for design and selectionAS 4024.1603-2019, Safety of machinery, Part 1603: Design of controls, interlocks and guards - Prevention of unexpected start-upAS/NZS 4024.1604:2019, Safety of machinery, Part 1604: Design of controls, interlocks and guarding - Emergency stop - Principles for design (ISO 13850:2017 (ED.3.0), MOD)AS/NZS 4024.1701:2019, Safety of machinery, Part 1701: Human body measurements - Basic human body measurements for technological designAS/NZS 4024.1702:2014, Safety of machinery, Part 1702: Human body measurements - Principles for determining the dimensions required for openings for whole body access into machineryAS/NZS 4024.1703:2014, Safety of machinery, Part 1703: Human body measurements - Principles for determining the dimensions required for access openingsAS/NZS 4024.1704:2014, Safety of machinery, Part 1704: Human body measurements - Anthropometric dataAS/NZS 4024.1801:2014, Safety of machinery, Part 1801: Safety distances to prevent danger zones being reached by upper and lower limbsAS/NZS 4024.1803:2019, Safety of machinery, Part 1803: Safety distances and safety gaps - Minimum gaps to prevent crushing of parts of the human bodyAS/NZS 4024.1901:2014, Safety of machinery, Part 1901: Displays, controls, actuators and signals - Ergonomic requirements for the design of displays and control actuators -General principles for human interactions with displays and control actuatorsAS/NZS 4024.1902:2014, Safety of machinery, Part 1902: - Displays, controls, actuators and signals - Ergonomic requirements for the design of displays and control actuators - DisplaysAS/NZS 4024.1903:2014, Safety of machinery, Part 1903: Displays, controls, actuators and signals - Ergonomic requirements for the design of displays and control actuators - Control actuatorsAS/NZS 4024.1904:2014, Safety of machinery, Part 1904: Displays, controls, actuators and signals - Indication, marking and actuation - Requirements for visual, auditory and tactile signalsAS/NZS 4024.1905:2014, Safety of machinery, Part 1905: Displays, controls, actuators and signals - Indication, marking and actuation - Requirements for markingAS/NZS 4024.1906:2014, Safety of machinery, Part 1906: Displays, controls, actuators and signals - Indication, marking and actuation - Requirements for the location and operation of actuatorsAS/NZS 4024.1907:2014, Safety of machinery, Part 1907: Displays, controls, actuators and signals - System of auditory and visual danger and information signals