首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 BS 07/30170117 DC
到馆提醒
收藏跟踪
购买正版
BS EN 15729. Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Determination of mean and maximum abrasion (tilting method) 英国标准EN 15729 塑料管道系统 基于不饱和聚酯树脂(UP)的玻璃纤维增强热固性塑料(GRP) 平均磨损和最大磨损的测定(倾斜法)
发布日期: 2007-10-15
交叉引用:FEPA 42-1:2006购买时可用的所有现行修订均包含在本文件的购买中。
Cross References:FEPA 42-1:2006All current amendments available at time of purchase are included with the purchase of this document.
分类信息
发布单位或类别: 英国-英国标准学会
关联关系
研制信息
相似标准/计划/法规
现行
BS 07/30171155 DC
BS ISO 8521. Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Test methods for the determination of the apparent initial circumferential tensile strength
BS ISO 8521 塑料管道系统 玻璃纤维增强热固性塑料(GRP)管 测定表观初始周向抗拉强度的试验方法
2007-08-31
现行
DIN EN 761
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the creep factor under dry conditions; German version EN 761:1994
塑料管道系统.玻璃纤维增强热固性塑料(GRP)管.干燥条件下蠕变系数的测定;德文版EN 761:1994
1994-08-01
现行
BS 05/30141329 DC
EN 15383. Plastics piping systems for drainage and sewerage. Glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP). Manholes and inspection chambers
EN 15383 排水和排污用塑料管道系统 基于聚酯树脂(UP)的玻璃纤维增强热固性塑料(GRP) 人孔和检查室
2005-11-01
现行
BS 10/30237537 DC
EN 15383. Plastics piping systems for drainage and sewerage. Glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP). Manholes and inspection chambers
EN 15383 排水和排污用塑料管道系统 基于聚酯树脂(UP)的玻璃纤维增强热固性塑料(GRP) 人孔和检查室
2010-10-26
现行
DIN SPEC 1188
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Report on the determination of mean abrasion after a defined number of test cycles; German version CEN/TR 15729:2010
塑料管道系统.基于不饱和聚酯树脂(UP)的玻璃纤维增强热固性塑料(GRP).规定试验循环次数后平均磨损测定报告;德文版CEN/TR 15729:2010
2010-11-01
现行
BS 09/30210543 DC
BS ISO 12512. Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of initial specific ring stiffness and resistance to initial ring deflection using segment test pieces cut from a pipe
BS ISO 12512 塑料管道系统 玻璃纤维增强热固性塑料(GRP)管 使用从管道上切下的分段试件测定初始比环刚度和初始环挠度阻力
2009-10-19