ISO 19899:2010-塑料管道系统——聚烯烃管和机械配件组件——耐端部载荷的试验方法（AREL试验） -国家数字标准馆

现行 ISO 19899:2010

到馆阅读

收藏跟踪

购买正版

Plastics piping systems — Polyolefin pipes and mechanical fitting assemblies — Test method for the resistance to end load (AREL test) 塑料管道系统——聚烯烃管和机械配件组件——耐端部载荷的试验方法（AREL试验）

发布日期： 2010-08-30

ISO 19899:2010规定了一种方法，用于确定标称外径小于或等于63 mm的机械连接聚烯烃管和配件组件，在长期施加恒定纵向作用力的情况下，组件松弛和蠕变对组件抵抗管道拔出的影响。

ISO 19899:2010 specifies a method to determine, for mechanically jointed polyolefin pipe and fitting assemblies in sizes of nominal outside diameter of less than or equal to 63 mm, the effect of component relaxation and creep on the resistance of the assembly to pipe pull out under the long-term application of a constant and longitudinally applied force.

分类信息

发布单位或类别：国际组织-国际标准化组织

ICS分类： 23.040.20管道部件和管道 - 塑料管

关联关系

研制信息

归口单位： ISO/TC 138/SC 5

相似标准/计划/法规

BS ISO 19899-2010

Plastics piping systems. Polyolefin pipes and mechanical fitting assemblies. Test method for the resistance to end load (AREL test)
塑料管道系统聚烯烃管和机械配件组件耐端部载荷的试验方法（AREL试验）

GOST R ISO 19899-2020

Трубопроводы из пластмасс. Механические соединения между фитингами и трубами из полиолефинов. Метод испытания на стойкость к осевой нагрузке (испытания AREL)
塑料管道系统聚烯烃管和机械配件组件抗端载试验方法（AREL试验）

Plastics piping systems — Mechanical fittings for pressure piping systems — Specifications
塑料管道系统 - 压力管道系统的机械配件 - 规格

BS ISO 17885-2021

Plastics piping systems. Mechanical fittings for pressure piping systems. Specifications
塑料管道系统压力管道系统的机械配件规格

Plastics piping and ducting systems. Polyolefin pipes and fittings. Determination of oxidation induction time
塑料管道系统聚烯烃管道和配件氧化诱导时间的测定

UNE-EN 728-1997

PLASTICS PIPING AND DUCTING SYSTEMS. POLYOLEFIN PIPES AND FITTINGS. DETERMINATION OF OXIDATION INDUCTION TIME.
塑料管道系统聚烯烃管道和配件氧化诱导时间的测定

UNE-EN 713-1994

PLASTICS PIPING SYSTEMS. MECHANICAL JOINTS BETWEEN FITTINGS AND POLYOLEFIN PRESSURE PIPES. TEST METHOD FOR LEAKTIGHTNESS UNDER INTERNAL PRESSURE OF ASSEMBLIES SUBJECTED TO BENDING.
塑料管道系统配件和聚烯烃压力管之间的机械接头弯曲组件在内部压力下密封性的试验方法

UNE-EN 12256-1999

PLASTICS PIPING SYSTEMS - THERMOPLASTICS FITTINGS - TEST METHOD FOR MECHANICAL STRENGTH OR FLEXIBILITY OF FABRICATED FITTINGS
塑料管道系统.热塑性配件.装配配件的机械强度或柔韧性的试验方法

Plastic piping systems — Mechanical joints between fittings and pressure pipes — Test method for leaktightness under negative pressure
塑料管道系统.配件和压力管道之间的机械接头.负压下密封性的试验方法

Plastics piping systems — Mechanical joints between fittings and pressure pipes — Test method for leaktightness under internal pressure
塑料管道系统 - 配件和压力管之间的机械接头 - 内部压力下的泄漏测试方法

BS EN ISO 3458-2015

Plastics piping systems. Mechanical joints between fittings and pressure pipes. Test method for leaktightness under internal pressure
塑料管道系统配件和压力管道之间的机械接头内压下密封性的试验方法

BS EN ISO 16486-3-2020

Plastics piping systems for the supply of gaseous fuels. Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing-Fittings
气体燃料供应用塑料管道系统带熔焊和机械连接的未增塑聚酰胺（PA-U）管道系统

플라스틱 배관 시스템 — 압력관과 이음관의 기계적 연결부 — 내압하에서 수밀성 시험
塑料管道系统配件和压力管道之间的机械接头内压密封性试验方法

BS EN ISO 16486-5-2021

Plastics piping systems for the supply of gaseous fuels. Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing-Fitness for purpose of the system
气体燃料供应用塑料管道系统带熔焊和机械连接的未增塑聚酰胺（PA-U）管道系统

ISO 16486-3-2020

Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 3: Fittings
用于供应气体燃料的塑料管道系统 - 具有熔接和机械接合的未增塑聚酰胺（Pa-U）管道系统 - 第3部分:配件

플라스틱 배관 시스템 — 압력관과 이음관의 기계적 연결부 — 축 방향 정하중 하의 뽑힘 저항 시험방법
塑料管道系统 - 配件和压力管道之间的机械接头 - 恒定纵向力下的抗拉力试验方法

플라스틱 배관 시스템 — 압력관 및 이음관의 기계적 연결부 — 축 방향 정하중 하의 뽑힘 저항 시험방법
塑料管道系统配件和压力管道之间的机械接头恒定纵向力下抗拔性的试验方法

Plastics piping systems — Mechanical joints between fittings and pressure pipes — Test method for resistance to pull-out under constant longitudinal force
塑料管道系统.配件和压力管道之间的机械接头.恒定纵向力下抗拔出的试验方法

Plastics piping systems — Mechanical joints between fittings and pressure pipes — Test method for leaktightness under internal pressure of assemblies subjected to bending
塑料管道系统 - 配件和压力管之间的机械接头 - 受弯曲组件的内部压力下的密封性的测试方法

BS EN ISO 3501-2022

Plastics piping systems. Mechanical joints between fittings and pressure pipes. Test method for resistance to pull-out under constant longitudinal force
塑料管道系统配件和压力管道之间的机械接头恒定纵向力下抗拔出的试验方法

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统