1.1 本规范涵盖了应用外部和内部波特兰水泥基灰泥的板条和板条安装的最低技术要求，如规范中所述 C926 这些要求并不默认为合同目的界定工作单位或分配责任，这是订约实体之间订立的一项或多项合同的范围。 1.2 目录: 范围 1 参考文献 2 术语 3 材料的交付和储存 4 材料 5 基材接受金属车床和板条的要求 6 安装 7 工艺 7.1 墙壁金属板条的安装 7.2 金属石膏底座的安装 7.3 车床附件的安装 7.4 关键词 8 吊顶金属板条的安装 附件A1 1.3 如果抹灰组件和结构需要耐火等级，则施工细节应符合满足所施加的耐火等级要求的组件的防火试验报告。 1.4 如果对抹灰组件和结构需要特定程度的声音控制，则结构的细节应符合在认可的测试实验室按照测试方法的适用要求进行的正式测试报告 E90 . 1.5 以英寸-磅单位表示的值应被视为标准值。括号中给出的值是对SI单位的数学转换，仅供参考，不被视为标准。 1.6 本规范的文本参考了提供解释材料的注释和脚注。这些注释和脚注（不包括表格和图中的注释和脚注）不应被视为规范的要求。 1.7 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认的标准化原则制定的。

1.1 This specification covers the minimum technical requirements for the installation of lathing and furring for the application of exterior and interior portland cement-based plaster, as in Specification C926 . These requirements do not by default define a unit of work or assign responsibility for contractual purposes, which is the purview of a contract or contracts made between contracting entities. 1.2 Table of Contents: Scope 1 Referenced Documents 2 Terminology 3 Delivery and Storage of Materials 4 Materials 5 Requirements for Substrates to Receive Metal Lathing & Furring 6 Installation 7 Workmanship 7.1 Installation of Metal Furring for Walls 7.2 Installation of Metal Plaster Bases 7.3 Installation of Lathing Accessories 7.4 Keywords 8 Installation of Metal Furring for Suspended Ceilings Annex A1 1.3 Where a fire resistance rating is required for plastered assemblies and constructions, details of construction shall be in accordance with reports of fire tests of assemblies that have met the requirements of the fire rating imposed. 1.4 Where a specific degree of sound control is required for plastered assemblies and constructions, details of construction shall be in accordance with official reports of tests conducted in recognized testing laboratories in accordance with the applicable requirements of Test Method E90 . 1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.6 The text of this specification references notes and footnotes that provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the specification. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.