ISO 12301:2007规定了以下类型滑动轴承的几何和材料质量特性的质量控制技术和检验:带或不带法兰的薄壁半轴承，如ISO 3548所规定；金属厚壁半轴承（带和不带法兰），制造成半部分，但必须可互换，比率s3:Do>0.11；ISO 3547中规定的缠绕衬套；由实心和多层材料制成、外径不超过230毫米的未分割金属衬套（带和不带法兰）；内径高达200毫米的固体聚合物衬套（带和不带法兰）；环型止推垫圈和压制双金属半止推垫圈，分别按照ISO 6525和ISO 6526的规定；以及由烧结材料制成的衬套，如ISO 2795中规定的。

ISO 12301:2007 specifies quality control techniques and inspection of the geometrical and material quality characteristics of the following types of plain bearings: thin-walled half-bearings with or without flange, as specified in ISO 3548; metallic thick-walled half-bearings (with and without flange) that are manufactured as halves but that are necessarily interchangeable and have the ratio s₃ : D_o > 0,11; wrapped bushes, as specified in ISO 3547; unsplit metallic bushes (with and without flange) made from solid and multilayer materials and with outside diameters up to 230 mm; solid polymer bushes (with and without flange) with inside diameters up to 200 mm; ring-type thrust washers and pressed bimetallic half-thrust washers, as specified in ISO 6525 and ISO 6526, respectively; and bushes made from sintered material, as specified in ISO 2795.