首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 KS W ISO 8641-2005(2020)
到馆提醒
收藏跟踪
购买正版
항공 우주-최대 작동 온도가 425 ℃ 이상인 풀림 방지 너트-조달 규격 航空航天最高工作温度425℃以上自锁螺母采购规范
发布日期: 2005-12-22
该规格规定了在最大温度为425℃以上的环境下,对航空航天用MJ米螺钉防松螺母的要求特性。如果在该文档中应用该规格,则该规格适用于前面定义的防松螺母。
이 규격은 최대 온도가 섭씨 425 ℃ 이상인 환경에서 항공 우주용으로 사용하는 MJ 미터 나사로 된 풀 림 방지 너트에 대한 요구 특성을 규정한다. 이 규격은 해당 문서에서 이 규격을 적용하는 경우에는 앞 에서 정의된 풀림 방지 너트에 적용된다.
分类信息
关联关系
研制信息
相似标准/计划/法规
现行
KS W ISO 8642(2018 Confirm)
항공 우주-최대 작동 온도가 425 ℃이상인 풀림 방지 너트-시험방법
航空航天最高工作温度425℃以上自锁螺母试验方法
2007-10-31
现行
KS W ISO 8642(2023 Confirm)
항공 우주-최대 작동 온도가 425 ℃이상인 풀림 방지 너트-시험방법
航空航天最高工作温度大于425℃的自锁螺母试验方法
2007-10-31
现行
BS ISO 8641-2008
Aerospace. Self-locking nuts with maximum operating temperature greater than 425 °C. Procurement specification
航空航天最高工作温度大于425℃的自锁螺母 采购规范
2008-09-30
现行
BS ISO 8642-2008
Aerospace. Self-locking nuts with maximum operating temperature greater than 425 degrees C. Test methods
航空航天最高工作温度大于425℃的自锁螺母.试验方法
2008-12-31
现行
ISO 8641-2008
Aerospace — Self-locking nuts with maximum operating temperature greater than 425 degrees C — Procurement specification
航空和航天;最高工作温度大于425℃的自锁螺母——采购规范
2008-08-26
现行
ISO 8642-2008
Aerospace — Self-locking nuts with maximum operating temperature greater than 425 degrees C — Test methods
航空和航天;最高工作温度大于425℃的自锁螺母——试验方法
2008-08-26
现行
BS 05/30136401 DC
ISO 8642. Aerospace. Self-locking nuts with maximum operating temperature greater than 425 degreesC. Test methods
ISO 8642 航空航天最高工作温度大于425摄氏度的自锁螺母 测试方法
2005-07-14
现行
BS 05/30136416 DC
ISO 8641. Aerospace. Self-locking nuts with maximum operating temperature greater than 425 degreesC. Procurement specification
ISO 8641 航空航天最高工作温度大于425摄氏度的自锁螺母 采购规范
2005-07-14
现行
KS W ISO 5858(2018 Confirm)
항공우주 - 최대 작동온도가 섭씨 425도 이하인 풀림 방지 너트 - 조달규격
航空航天最高工作温度425℃以下自锁螺母采购规范
2008-07-15
现行
KS W ISO 5858(2023 Confirm)
항공우주 - 최대 작동온도가 섭씨 425도 이하인 풀림 방지 너트 - 조달규격
航空航天最高工作温度低于425℃的自锁螺母采购规范
2008-07-15
现行
ISO 7481-2023
Aerospace — Nuts, self-locking, with maximum operating temperature less than or equal to 425 °C — Test methods
航空航天最高工作温度小于或等于425°C的自锁螺母试验方法
2023-11-02
现行
ISO 5858-1999
Aerospace — Nuts, self-locking, with maximum operating temperature less than or equal to 425 degrees C — Procurement specification
航空和航天;自锁螺母 最高工作温度小于或等于425℃——采购规范
1999-11-18
现行
DIN 65016
Aerospace - Self-locking nuts with reduced locking torque with maximum operating temperature less than or equal to 425 °C - Technical Specification
航空航天.最大工作温度小于或等于425℃时锁紧扭矩减小的自锁螺母.技术规范
2017-03-01
现行
HB 7596-2011
使用温度不高于425℃的MJ螺纹自锁螺母试验方法
Test method for nuts,self-locking,with maximum operating temperature less than or equal to 425℃
2011-07-19
现行
HB 7595-2011
使用温度不高于425℃的MJ螺纹自锁螺母通用规范
General specification for nuts,self-locking,with maximum operating temperature less than or equal to 425℃
2011-07-19
现行
BS 2A 302-2000
Nuts, self-locking, with maximum operating temperatures less than or equal to 425°C. Procurement specification
最高工作温度小于或等于425℃的自锁螺母 采购规范
2001-06-15
现行
UNE 28581-1986
AEROSPACE. FASTENERS. SELF-LOCKING NUTS WITH MAXIMUM OPERATING TEMPERTURE LESS THAN OR EQUAL TO 425ºC. TEST METHODS.
航空航天紧固件 最高工作温度小于或等于425ºC的自锁螺母 试验方法
1986-11-15
现行
BS EN 3733-103-2008
Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150°C continuous-Protective cover jam nut receptacle. Product standard
航空航天系列 单通道圆形光学连接器 通过自锁环耦合 连续工作温度高达150℃ 保护盖防松螺母插座 产品标准
2008-05-30
现行
BS EN 3733-106-2008
Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150°C continuous-Receptacle connector dummy jam nut. Product standard
航空航天系列 单通道圆形光学连接器 通过自锁环耦合 连续工作温度高达150℃ 插座连接器假锁紧螺母 产品标准
2008-05-30
现行
BS EN 3733-006-2008
Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150 °C continuous-Receptacle, connector, jam nut fixing for cable according to EN 4532, product standard
航空航天系列 单通道圆形光学连接器 通过自锁环耦合 工作温度150°C连续 符合EN 4532产品标准的电缆插座、连接器、防松螺母固定件
2008-07-31