ISO 6363-5:2022-锻铝和铝合金.冷拔棒材管材和线材.第5部分:拉制方形和六角棒材和线材的形状和尺寸公差-国家数字标准馆

现行 ISO 6363-5:2022

到馆提醒

收藏跟踪

购买正版

Wrought aluminium and aluminium alloys — Cold-drawn rods/bars, tubes and wires — Part 5: Tolerances on form and dimensions for drawn square and hexagonal bars and wires 锻铝和铝合金.冷拔棒材管材和线材.第5部分:拉制方形和六角棒材和线材的形状和尺寸公差

发布日期： 2022-07-01

                本文件规定了对边宽度小于等于100？的锻铝和铝合金拉制方形和六角棒材和线材的形状和尺寸公差毫米。
对于电线，本文件不适用于电气、焊接和航空用途。
对于拉拔钢筋，4.1至4.5适用，仅4.1适用于拉拔钢丝。

This document specifies the tolerances on form and dimensions of wrought aluminium and aluminium alloy drawn square and hexagonal bars and wires with widths across flats up to and including 100 mm.
For wires, this document does not apply to electrical, welding and aeronautical purposes.
For drawn bars, 4.1 to 4.5 apply, and only 4.1 applies to drawn wires.

分类信息

发布单位或类别：国际组织-国际标准化组织

ICS分类： 77.150.10有色金属产品 - 铝产品

关联关系

研制信息

归口单位： ISO/TC 79/SC 6

相似标准/计划/法规

BS EN 754-2-2016

Aluminium and aluminium alloys. Cold drawn rod/bar and tube-Mechanical properties
铝和铝合金冷拔杆/棒和管

ISO 6363-3-2022

Wrought aluminium and aluminium alloys — Cold-drawn rods/bars, tubes and wires — Part 3: Tolerances on form and dimensions for drawn rods/bars and wires
锻铝和铝合金.冷拔棒材管材和线材.第3部分:拉拔棒材和线材的形状和尺寸公差

ISO 6363-2-2022

Wrought aluminium and aluminium alloys — Cold-drawn rods/bars, tubes and wires — Part 2: Mechanical properties
锻铝和铝合金.冷拔棒材管材和线材.第2部分:机械性能

ISO 6363-6-2022

Wrought aluminium and aluminium alloys — Cold-drawn rods/bars, tubes and wires — Part 6: Tolerances on form and dimensions for drawn round tubes
锻铝和铝合金.冷拔棒材管材和线材.第6部分:拉制圆管的形状和尺寸公差

ISO 6363-4-2022

Wrought aluminium and aluminium alloys — Cold-drawn rods/bars, tubes and wires — Part 4: Tolerances on form and dimensions for drawn rectangular bars and wires
锻铝和铝合金.冷拔棒材管材和线材.第4部分:拉拔矩形棒材和线材的形状和尺寸公差

BS EN 754-4-2008

Aluminium and aluminium alloys. Cold drawn rod/bar and tube-Square bars, tolerances on dimensions and form
铝和铝合金冷拔杆/棒和管方钢尺寸和形状公差

BS EN 754-6-2008

Aluminium and aluminium alloys. Cold drawn rod/bar and tube-Hexagonal bars, tolerances on dimensions and form
铝和铝合金冷拔杆/棒和管六角钢筋.尺寸和形状公差

BS EN 754-3-2008

Aluminium and aluminium alloys. Cold drawn rod/bar and tube-Round bars, tolerances on dimensions and form
铝和铝合金冷拔杆/棒和管圆钢尺寸和形状公差

BS EN 754-5-2008

Aluminium and aluminium alloys. Cold drawn rod/bar and tube-Rectangular bars, tolerances on dimensions and form
铝和铝合金冷拔杆/棒和管矩形钢筋.尺寸和形状公差

BS EN 754-8-2016

Aluminium and aluminium alloys. Cold drawn rod/bar and tube-Porthole tubes, tolerances on dimensions and form
铝和铝合金冷拔杆/棒和管

BS EN 754-7-2016

Aluminium and aluminium alloys. Cold drawn rod/bar and tube-Seamless tubes, tolerances on dimensions and form
铝和铝合金冷拔杆/棒和管

ISO 6363-1-2022

Wrought aluminium and aluminium alloys — Cold-drawn rods/bars, tubes and wires — Part 1: Technical conditions for inspection and delivery
锻铝和铝合金.冷拔棒材管材和线材.第1部分:检验和交付技术条件

BS EN 754-1-2016

Aluminium and aluminium alloys. Cold drawn rod/bar and tube-Technical conditions for inspection and delivery
铝和铝合金冷拔杆/棒和管

UNE-EN 754-2-2009

Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 2: Mechanical properties
铝和铝合金.冷拔杆/棒和管.第2部分:机械性能

Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 5: Rectangular bars, tolerances on dimensions and form
铝和铝合金.冷拉棒材/棒材和管材.第5部分:矩形棒材.尺寸和形状公差；德文版EN 754-5:2008

UNE-EN 754-5-2009

Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 5: Rectangular bars, tolerances on dimensions and form
铝和铝合金冷拔杆/棒和管第5部分:矩形棒尺寸和形状公差

Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 6: Hexagonal bars, tolerances on dimensions and form
铝和铝合金.冷拉棒材/棒材和管材.第6部分:六角棒材.尺寸和形状公差；德文版EN 754-6:2008

Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 4: Square bars, tolerances on dimensions and form
铝和铝合金.冷拉棒材/棒材和管材.第4部分:方棒材.尺寸和形状公差；德文版EN 754-4:2008

Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 3: Round bars, tolerances on dimensions and form
铝和铝合金.冷拔杆/棒和管.第3部分:圆钢.尺寸和形状公差；德文版EN 754-3:2008

UNE-EN 754-3-2009

Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 3: Round bars, tolerances on dimensions and form
铝和铝合金冷拔杆/棒和管第3部分:圆钢尺寸和形状公差

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

关于我们

查新颖性

查有效性

跟踪标准

比对标准

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统