BS EN ISO 11118:2015+A1:2020-气瓶不可重复充装的金属气瓶规范和试验方法-国家数字标准馆

现行 BS EN ISO 11118:2015+A1:2020

到馆提醒

收藏跟踪

购买正版

Gas cylinders. Non-refillable metallic gas cylinders. Specification and test methods 气瓶不可重复充装的金属气瓶规范和试验方法

发布日期： 2020-05-11

本国际标准规定了压缩气体和液化气体用焊接、钎焊或无缝结构的不可再填充金属气瓶的材料、设计、检验、结构和工艺、制造工艺和试验的最低要求，包括其不可再填充密封装置及其试验方法的要求。包含以下内容:BS EN ISO 11118:2015

This International Standard specifies minimum requirements for the material, design, inspections, construction and workmanship, manufacturing processes, and tests at manufacture of non-refillable metallic gas cylinders of welded, brazed, or seamless construction for compressed and liquefied gases including the requirements for their non-refillable sealing devices and their methods of testing.Incorporates the following:BS EN ISO 11118:2015

分类信息

发布单位或类别：英国-英国标准学会

关联关系

研制信息

相似标准/计划/法规

UNE-EN 12205-2002

Transportable gas cylinders - Non refillable metallic gas cylinders.
可运输气瓶.不可再充装的金属气瓶

가스 실린더 — 재충전 금지 금속제 실린더 — 제원 및 시험방법
气瓶 - 非再填充金属气瓶 - 规范和试验方法

KS B ISO 11118(2021 Confirm)

가스 실린더 — 재충전 금지 금속제 실린더 — 제원 및 시험방법
气瓶－不可再充装金属气瓶－规范和试验方法

Gas cylinders — Non-refillable metallic gas cylinders — Specification and test methods
气瓶 - 不可补充金属气瓶 - 规格和测试方法

ISO 11118-2015/Amd 1-2019

Gas cylinders — Non-refillable metallic gas cylinders — Specification and test methods — Amendment 1
气瓶.不可再填充的金属气瓶.规范和试验方法.修改件1

BS 09/30196126 DC

BS ISO 11118. Gas cylinders. Non-refillable metallic gas cylinders. Specification and test methods
BS ISO 11118 气瓶不可重复充装的金属气瓶规范和试验方法

UNE-EN ISO 13340-2001

TRANSPORTABLE GAS CYLINDERS - CYLINDERS VALVES FOR NON-REFILLABLE CYLINDERS - SPECIFICATION AND PROTOTYPE TESTING. (ISO 13340:2001).
可运输气瓶.不可再充装气瓶用气瓶阀.规范和原型试验（ISO 13340-2001）

KS B ISO 11119-3(2020 Confirm)

가스 실린더 — 재충전용 복합재료 가스 실린더 및 튜브 — 제3부: 450 L 이하의 하중 비분산 금속 또는 비금속 라이너로 된 풀랩 섬유강화 복합재료 가스 실린더 및 튜브
气瓶

BS EN 12862-2000

Transportable gas cylinders. Specification for the design and construction of refillable transportable welded aluminium alloy gas cylinders
可运输的气瓶可再填充可运输焊接铝合金气瓶的设计和制造规范

UNE-EN 12862-2001

Transportable gas cylinders. Specification for the design and construction of refillable transportable welded aluminium alloy gas cylinders.
可运输的气瓶可再填充可运输焊接铝合金气瓶的设计和制造规范

BS EN ISO 11114-2-2021

Gas cylinders. Compatibility of cylinder and valve materials with gas contents-Non-metallic materials
气瓶气瓶和阀门材料与气体含量的兼容性

ISO 11119-3-2020

Gas cylinders — Design, construction and testing of refillable composite gas cylinders and tubes — Part 3: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with non-load-sharing metallic or non-metallic liners or without liners
气瓶可再充装的复合材料气瓶和管材的设计、制造和试验第3部分:450升及以下带非均载金属或非金属衬里或无衬里的全包裹纤维增强复合材料气瓶和管材

KS B ISO 11114-2(2020 Confirm)

가스 실린더 — 가스 성분에 따른 실린더와 밸브 재료와의 호환성 — 제2부: 비금속 재료
气瓶 - 气瓶和阀门材料与气体含量的兼容性 - 第2部分:非金属材料

ISO 11114-2-2021

Gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 2: Non-metallic materials
气瓶.气瓶和阀门材料与气体含量的兼容性.第2部分:非金属材料

BS ISO 11119-4-2016

Gas cylinders. Refillable composite gas cylinders. Design, construction and testing-Fully wrapped fibre reinforced composite gas cylinders up to 150 l with load-sharing welded metallic liners
气瓶可重复充装的复合气瓶设计、施工和测试

ISO 11119-3-2020/Amd 1-2023

Gas cylinders — Design, construction and testing of refillable composite gas cylinders and tubes — Part 3: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with non-load-sharing metallic or non-metallic liners or without liners — Amendment 1
气瓶.可再填充复合材料气瓶和管的设计、结构和试验.第3部分:450升以下带非均载金属或非金属衬里或无衬里的全包裹纤维增强复合材料气瓶或管.修改件1

ISO 11119-4-2016

Gas cylinders — Refillable composite gas cylinders — Design, construction and testing — Part 4: Fully wrapped fibre reinforced composite gas cylinders up to 150 l with load-sharing welded metallic liners
气瓶.可重复充装的复合气瓶.设计结构和试验.第4部分:带均载焊接金属内衬的150L以下全缠绕纤维增强复合气瓶

Transportable gas cylinders - Specification for the design and construction of refillable transportable welded aluminium alloy gas cylinders; English version of DIN EN 12862
可运输气瓶.可再填充可运输焊接铝合金气瓶的设计和制造规范；德文版EN 12862:2000

KS B ISO 11119-2

가스 실린더 — 재충전용 복합재료 가스 실린더 및 튜브 — 설계, 제조 및 시험 — 제2부: 450 L 이하의 하중을 분담하는 금속 라이너로 된 풀랩 섬유 강화 복합재료 가스 실린더 및 튜브
气瓶 - 可重复填充的复合气瓶和管 - 设计构造和测试 - 第2部分:全包裹的纤维增强复合气瓶和管高达450 L带负载共享金属衬套

KS B ISO 11119-2(2021 Confirm)

가스 실린더 — 재충전용 복합재료 가스 실린더 및 튜브 — 설계, 제조 및 시험 — 제2부: 450 L 이하의 하중을 분담하는 금속 라이너로 된 풀랩 섬유 강화 복합재료 가스 실린더 및 튜브
气瓶.可重复充装的复合气瓶和管.设计结构和试验.第2部分:带均载金属内衬的450L以下全缠绕纤维增强复合气瓶和管

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统